Team Unimog Punga Project

[fihsak]

@ Dee Dee
ok so the unique idea is of following the Truck Art for the crew cabin only, u may not like the idea but it just clicked into my mind dont know how it will look like

i have downloaded a pic of uni mog from net, the sketch is complete just needs to be scaned or photographed for uploading, that was wat i had in mind

[fihsak]

the sketch!

hope u like it just a litle contribution from my side n the owner may have other things in mind as every1 has different opinion and vision

best of luck for the project bro! (Y)

[DeeDee]

@zsaw
thx bro, i would love if i could get power steering installed in my machine. there are model in unimogs with power steering. but i dont know if i could get the alteration done machenically rite. will look forward to your suggestions..
rgds

[akifjanjua]

@fihsak

brilliant design and good sketching liked the idea of putting a flat diamond plate bed.. may b of aluminium sheet

[fihsak]

@ akifjanjua

thanx for appreciation of my sketch, this was the 1st sketch in my new sketch book

about the design, i wud like to be the Mog like this if it was my own but depends on the owner of the Mog

regards

[aisheikh]

@DeeDee

Long time no see. When are we taking your beast to Thoker for offroading.

By the way did you find the model # of the larger unimogs that are up for auction.

[DeeDee]

@fihsak

sorry for the delayed response, actually i hv seen the unique idea last night and as i was replying to your idea, power failure

sorry, i didnt like the idea.

i loved the idea, you are a gifted boy. i might not take the whole idea but i would love to incorporate most of it.

dear why you have put the winch under the bumper. as i dont find it practical.

can you make put 2 seats and roll bars and also a spare wheel on the back. love to see if you can arrange them for me.

thanks for your input, will look forward for more.

[DeeDee]

@aisheikh
yes rite long time and also long time till the mog is ready for offroading. realy got busy in some business, the project was also slow. now as you know i am leaving pakistan for 10 days, so hopefully project will take full pace on my return.

will tell abt 2.5ton unomog.
btw i took her to offroading in the near by area and loved the way she moves off the road.

will tell abt 2.5toner unimog

[fihsak]

@ Dee Dee
about the unique idea i later realised that it is unique but maza nai ayega n Police will take punga with the UNIMOG Punga for it being understood as Comercial vehicle

The winch Later clicked ito my mind when i completed the skecth n was placing the License plate

I made the rear sketch but for the seats and roll cage i will have to draw a new 1 and further i specified the solution to ur Spare tyre place and will upload the sketch in a while

I like to work on the ideas for ur UniMog but hav to take out time for it as it needs focus n the rear view skecth i completed in the light of LED torch as the power went off

regards

[fihsak]

@ Dee Dee
Rear View Sketch

1. Brake, Parking & Indicators ( High Mounting for Clear View to Rear Vehicles)
2. Jerry Cane ( For Fuel or Water)
3. Battery ( the Stock Place for it can be changed to some Safer place e.g. Inside Cabin)
4. Spare Tire can be mounted at the tail for better weight balance
5. Reverse Light ( For Effective light at Night)
6. Mud Guards ( Removable)
7. Brake, Parking, Indicator Lights ( Low Mounting for Close Rear Vehicles)
8. Tow
9. License Plate ( the one Provided in Prado or Old Land Crusier)
10. Mud Guard Mounting Arm (Adjustable & Removable through nuts & Bolts)
11. Fuel Tank
12. Diamond Sheet (Aluminum or Steel)
13. Tool Box ( Optional as it can be adjusted in the Cabin at the back of Seats)
14. Silencer ( High Mounting for better Exhaust Clearance during severe Off Roading)
15. Front Fog/Spot Lights

[fihsak]

@ Dee Dee
Plz post or mail me the clear side view & some form top of the Mog pix of the mog for roll cage bars and seats placement

hope u like the idea and there are cerain mistake in design coz m nt Chip Foose or Professional bs shoqia kabhi kabhi haath kharish kartey hain tu bana leta hun jo idea mind me ata hai
feel free to contact me anytime bro
(kashifqayum@gmail.com & 0334 900 9056)

regards

[DeeDee]

@fihsak
bro you are in head to toe in the punga project, if you agree (at your terms)

talking about professionals, i know lots of artist in NCA, (some freinds, some relatives) and also discussed with them on the fancy work but what diferentiate you from them, is that you hv a sense for 4x4 and you can exactly produce what is required.

well i will take pix as required by you and post them to you tom. will also discuss what i want from the ride and will appreciate the suggestions from your side.

[fihsak]

@ Dee Dee
thanx alot for considreing me in for ur UNIMOG Panga n if there are no rules and conditions that will be fine with me

i will be waiting for the pix from side angle and top and further kindly tell me how many seats u want in back and also how many spare tyres u will be mounting i.e. 1 or 2

regards

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[DeeDee]

@fihsak
thx bro for becoming a part in the panga. really appreciate that

rite now i am sitting at dubai airport and waiting for the connecting flight to tanzania. will be back on 10th. on my arrival we will discuss the project.

rgds

[fihsak]

@Dee Dee
Roger That, Hav safe Journey buddy and till then i will do my home work for ur UniMog

will get some ideas by surfing the Net for ur Roll Cage and some other Things i have in Mind with Cheaper( Price Wise) Solutions

T.C

Regards