Team Unimog Punga Project

[DeeDee]

@ RKR so what u think can u beat the Team Unimog´s Navigator in Ditches after having a ride

[/quote]

Maybe not as far as sitting in the Unimog is concerend, but sure can one he gets outside the Unimog!!! Aaja.

RKR

lolz @ Aaja

Special offer for RKR!!!

RKR next time you will be driving DeeMog and i will be your navigator on one of the obsticle.

really appreciate your concern to get mog off the road. thx man.

[DeeDee]

@DeeDee Bro, congrats, it was a pleasure to watch the mog killing the terrain. The ride with you as a navigator was one i will never forget. Your family, you, and us guys from 4x4 Engaged are very proud of this achievement. RKR

thx again. the pleasure is all mine having partners like you by my side. it was thrill killing the terain.

yes my family is more like thanks God mog get out of the garrage lol. they are proud of what we have made.

[RetardedBuddy]

DEEDEE
Great Machine but wouldn't a cabin(or whatever its called) in the rear add to the looks of the car and add a bit more weight to the rear for more stability?

[DeeDee]

DEEDEE Great Machine but wouldn't a cabin(or whatever its called) in the rear add to the looks of the car and add a bit more weight to the rear for more stability?

very true and am planing to put dala on the back of mog with rollcage and A type bullbar.

project is not over and these kinda project take some time to complete but the good thing now is i will test and alter and test and alter....

[fihsak]

@ DeeDee
ye test n alter tu hamari band baja dega
PS: M all with u tomm buddy

[DeeDee]

@fihsak
10-4

[fihsak]

[DeeDee]

[DeeDee]

[Basharatu]

Team UNIMOG, Panga is looking very nice and clean. I saw the performance on UTUBE & 4x4 engaged post & it was Fun 2 Class :). A/C in cab would be a great addition & the compartment below Navigator's seat can be used as refrigerator system :D. Have you brainstormed on kind of A/C which can fit into the cabin?

Regarding roll cage, pls count me inn 2, its a must. Pls also feedback on the performance of shocks & brakes on your last ride!

My Morris Project is in closing stages and Hopefully I will re-start the mogster project by 1st week of September - hopefully weather would be better by that time for rides.

I am wondering if IJC is planning a mega event in coming October/November where 2 Mogs can perform side 2 side

Thanks

Basharat

[DeeDee]

@Basharatu
thx bro. offroaders keep their rides clean as shown in last pic :). AC is must but now the following is necessary:
1) power steering
2) ABS brakes lol. servo boster brakes if possible front disk.
3) rollcage and A type bullbar to prevent front rollover.
3) weight on back or dala.
4) machanical winch.

lastly i have to reduce the speed of mog to 80km/h because it is dangerious at to handle mog at 110km/h

bro you are already in who else we gona share these things and you are the proud owner of 421.128.

I am sure there will be mega event by IJC and also hope it will be in november or december. it will be fun and than we will be able to launch a club "TEAM UNIMOG" where we share each and every process and trouble shooting pertaining to restoration and running of mog.

I am happy with the shocks as i told you before and recommend you the same. brakes are fine but works on double paddle.

do check the diff lockers the way i told you.

have you made any thread on restoration of mini moris. love to see it man, if possible can you send me pics of mini before and after

cheers
Adeel

[DeeDee]

[DeeDee]

[fihsak]

@ DeeDee
sudhar jaa Janj bhai se punga nahi karnay nahi to aisi jaga phanse ga k OK BYE bhi nahi sun paye ga :D:D

[Janj]

@ DeeDee sudhar jaa Janj bhai se punga nahi karnay nahi to aisi jaga phanse ga k OK BYE bhi nahi sun paye ga :D:D

[DeeDee]

[Basharatu]

Thank U Adeel & Great Work Again.I will definitely post stuff on Morris Minor, last Sunday Painter asked me for another 10 days delay due to humid weather as it can effect quality it doesnt dry quickly, hence attract bugs & dust. Now I am planning to start the Mog in parallel, atleast brakes Servo & Shocks can be done. Will do the power steering project together. Also doing some research on Mercedes 126's, it also comes with Power Box option, I think it can be integrated Mog's Steering, I have raised the query to Mercedes Mechanic, lets see.

I need some more details regarding roll cage, will call U for the same!

Thanks

Basharat

[DeeDee]

love to see how your project on Morris Minor comes out.

I am tied up in my work and hardly find time for the machenics but will be free after Ramazan and will do rest of work on mog. have discussed power box and servo but have to take the mog to a place where the machenic can check for different option of both. hope that Toyota is the answer in terms of maintenance as well :). will update you soon.

have different option that i am thinking of as for roll cage and stinger bar is concerned will also share it with you.

regards
Adeel

[DeeDee]

[Basharatu]

Nice picks again. U should also take some photos of head turned towards Mog in Lahore Bazars :). A media guy can follow U on a car covering the crowd