Temperature rising in lancer due to AC?

Tags: #<Tag:0x00000009fab258>

khattak3 (khattak3) 2014-05-22 14:07:34 +0500 #1

Hi friends

i recently done my whole lancer AC work (complete service+gas) from Abu bakar (Universal car AC). Really a koooool guy he is, very supporting. AC is now fine but problem is now that temperature started to rise as soon as AC is turned on. There are double fans to radiator, plus condensar fan.All three working fine. Also water level is not decreasing.

I want to know the possible reasons for it and any solution as i consumed alot of cash on AC already. Now due to this issue im unable to use AC. pls help

thanks & regards bros

Driftking86 (Driftking86) 2014-05-22 14:49:29 +0500 #2

Did u check the radiator fans when ac is turned on?

Same problem happend to my previous car as well... The fans were working fine when ac switched off... As soon as i would on the ac the fans would automatically shut off... Showed to an electrician & got the problem fixed.

Xulfiqar (Xulfiqar) 2014-05-22 15:33:08 +0500 #3

check the main crank pulley. If the rubber sandwich in it is cracked - you need a new pulley.

umarkhan1 (umarkhan1) 2014-05-22 15:46:12 +0500 #4

which pulley n rubber sir??didnt get it-
i am pretty sure that the OP is running his car with direct fans with no t-valve,so when he switches on the ac,the temp comes to half

khattak3 (khattak3) 2014-05-22 16:25:45 +0500 #5

@xulfiqar: which pulley and crank bro? pls elaborate a little
@umar khan1: yes its direct fans. and is it normal if with AC the needle goes to half??

c4capricorn (MHK) 2014-05-30 14:16:35 +0500 #6

He is probably talking abt pulley that connects to water body...

Sent from my GT-I9300 using PW Forums mobile app

umarkhan1 (umarkhan1) 2014-05-30 14:18:31 +0500 #7

t-valve installed??