Tips for Baleno

[inzamam.abbasi]

smooth

[inzamam.abbasi]

Dear Friends
I have baleno 2005
My car is bubbling event on a little jump and some time bumber bottom part hit on road is this a shocks problem?
if yes
Best Shocks for baleno?

advice please

thanks

[moizadil]

What gear oil do you use?

[mzahid]

Yes no resistance, even reverse is very smooth as well unlike other Suzukis. Get your clutch cable adjusted things will get better.

In 2017 I doubt any Baleno's real odometer will be under 100K Kms

[moizadil]

I want to know a thing about baleno brakes asap. When you guys press the pedal does it press in some distance before brakes actually engage or do the brakes engage all of a sudden? Please let me know your situation.

If the brake pedal in total can be pressed 10 cm then my brakes engage properly after the brake pedla is pressed 5 cm, before that the brakes work very very lightly.

So what I want to ask is how much do you have to press the brake pedal to apply brakes?

[mzahid]

Yes, for Baleno the brakes need to be pressed some distance before its effect is felt. Situation very much similar to old cultus.

Brake responsiveness of cars these days like city, corolla, swift is much better.

[moizadil]

Can the cng cylinder be removed from baleno 04 without any negative effect on suspension? I want to get rid of dead weight since i don't use cng

[saboor73]

If it is ff cng than you might end up with raised tail of your car

[moizadil]

What is ff cng? And are there any side effects of a raised tail?

[saboor73]

FF cng is short form for factory fitted cng and raised tail means your car will act like corolla

[Haider_Akbari]

I didn't think much. Just yesterday removed my CNG cylinder. Was damn heavy.. Kuch ho na ho zehni tension hat gae k gaari unload hogae

[moizadil]

I'm going to in the morning, I would at this moment at the night but it's very humid outside. The biggest concern I have is how will I remove an 80kg cylinder from the trunk, I'm a very slim guy

[pwuser148923659513]

U will need some one help to get it out of the cylinder bracket it damn heavy.when i took mine out i tried being hercules and after removing it using all my strenght i strained my left arm and lower back for a week.

[pwuser148923659513]

i guys is this cap allright for baleno radiator? I am pretty aure its not allowing to breathe coz bottle stays full while water gets lower inside radiator.

[saboor73]

You must be having leak somewhere in cooling system allowing radiator to pull air in instead of coolant from reserviour bottle

[Haider_Akbari]

Bro I can guarantee I am slimmer than you Khair I had help from my brother. 2 people can remove cylinder. What I did was that me and my brother took out cylinder from car n placed it on ground, then rolled it all the way to door step (ofcourse i removed the cylinder bracket). It was not at all tiring.

[pwuser148923659513]

Saboor bro radiator dun have a leak as i got it
checked from radiator wala and he said na even i got its joint freshed and service krwa dia.. it di suck water from resevoir even then

[pwuser148923659513]

If u try doing it with someones help its easy but alone its physically demanding as tgere is nothingvto grip on cylinder and lifting angle is awkward.
Plus a factory fitted bracket lower part cant be removed as it is welded to body.

[bonfire2006]

I have a problem with my wipers. They go beyond the wind screen and on the down side they also on the windscreen plastic patti. Any one have solution?

[pwuser148923659513]

May be they are loose and not properly adjusted. And if they are adjusted and not loose u might need to change their holding gutka underneeth the weathergrill.
Baleno k olastic k hotay han and tgey wearoff which cause play and wipers going beyond screen.