Dear All AOA. I am an old pakwheeler and baleno lover. Came back at this forum after a very long time because i am facing an issue with baleno’s AC for which i need suggestion from seniors. The story goes like that
My baleno’s compressor malfunctioned last season and electrician asked me that we have to change it now. Season was at the end so i decided that i will get new compressor in next season. So pulled out the old compressor.
Then now i went to electrician and boght genuine compressor of baleno from bilal gunj. When we fixed it its head pressure was too high and it was not cooling at all. Then we changed another one and now changed the condenser and drier also and also changed the cooling valve. But still the result is same. Its head pressure is still near 60 and its not cooling at all. Spent almost 25K on all this mess which are of no use for me now.
Now i consulted one other electrician and he suggested me to buy Rebuilt compressor of baleno and universal condenser, denso drier and then my cars AC will work fine. These all things plus labour will cost nearly 20k.
Another electrician suggested me to buy Duet compressor from bilal gunj alongwith bracket, condensor, drier and new supply line pipe. All things plus labour will cost 18k. Say 20k. But the problem is for installing Duet compressor we have to make alterations in pipes. Which i do not like.
I am very fed up with bilal gunj spare parts as this has cost me almost 25k loss. Please advise which of the above suggestions is good? Or if u have any other suggestion please advise.