Tips for Baleno

[abid110]

and the ecu is inside the dash if i am correct. so means the wire will be going from sensor till in-dash? and where will it be connected in ecu?

[RehanBhatti]

Yes. ECU is inside the dashboard. U trace the ECT sensor ground wire port at ECU and dont cut and waste the original wire just bypass it with a new wire. Actually, original wire is broken somewhere in the wiring loom.

[abid110]

ok - electrician ko kya bolun?

[RehanBhatti]

You better do it yourself otherwise ask him to bypass ground wire of ECT sensor from ECU to sensor.

[sameerulhaq064]

Guys, my Baleno is smoking a little bit. I haven't felt any decrease in engine performance, fuel consumption, oil consumption e.t.c. What could be the possible reason. The smoke is very light.

[abid110]

So we can give groundconnection from sensor to body directly too right?

[RehanBhatti]

Nahi bhai, it will not work out that way.
Below diagram is for Cultus ECT sensor.but The wire which has color code of B/Or and connected to E-02-9 port of ECU, That wire u need to bypass.

[abid110]

Today's purchase from Metro for both my cars

[abid110]

rehan bhai, electrician says that maybe your auto switch grip is not getting pulse from ecu to open the fan, ab ye kya cheez hai?

[alinajon.me123]

Why my car is missing when i open ac other wise my car is ok. whats the matter

[alinajon.me123]

electrician ko bolna yaha visit kary. car wash and wax pakistan

[tallalbinsaif]

Hello People ,

Please Recommend Baleno Specialist in MULTAN CITY.

Suzuki Service Centers dont have specialist guys ... They have just hired "Fitters" , Cant Diagnose the main problem , Bus Har Cheez Coils or Petrol Quality per Dal k Farigh hojatay hain ,

I ve 2005 JXR , Petrol Average = 7-8 km/ Ltr in City , 10-11 on Long (with AC)
Gas cylinder = 130-140 in City , 150-160 on log.

I ve never been able to Get that car above 120 kms/hr .. always wonder why

Pick is very Less on 1st & 2nd ... Car gets very heavy when picking speed...

Please Please Please Help. Em really worried ...

[abid110]

you must check following:

tappets must be set - not too loose not too tight
spark plug quality and gap
air filter is not choked
usage of genuine oil and not fake ones

[sameerulhaq064]

Anyone??

[RehanBhatti]

Slap him on face and tell him to check the whole wiring of ECT sensor properly.
There must be a broken wire in ur ECT sensor wiring which is coming from ECU to sensor and vise versa. And check radiator fan relay too.plz

[abid110]

My Baleno's panel is bad. Buttons are loose and its almost nearing its end. I plan to have it from aliexpress but its for LHD vehicles... If i have it here as its same thing as mine but just the auto button will be the left one. Otherwise it will be same. What is your input Daniyal and Hassan?

@dani_kk @Hassan1991 @RehanBhatti

[abid110]

Got it... Means i have to check wiring of this setup fully

[Hassan1991]

Bhai people in custom hold the automobile parts. They say there's a law according to which you can't important automobile parts. Actually they are asking for "Rishwat".
You can modify the wiring to work it like RHD. Just be sure clips are same and so does the wiring connectors.

[sameerulhaq064]

Why not get it from a kabariya? You can get one from gawalmandi Rawalpindi.

[dani_kk]

Why don't you search the used import parts? Like from kabli body parts shop?