Toyota Corolla Gli 2010 Fog light Cleaning and Installation DIY

[car_bus2008]

Fog lights Cleaned with Express Power Surf then applied Turtle Wax and Installed Fog lights in my Corolla Gli 2010 at home by myself.

:D:D:D:D:D

My tool kit

Bolts Removed

Torch used to remove bolts from downside.

Bolts of Entire Bumper Fitting

Bumper Removed

Bumper Removed Left View

Bumper Removed Right View

Fog Light Right Side

Fog light Left Side

Bumper After Fog Lights Fitting.The Grill which is downward was also dropped from its place also installed that back.

[FarhanAnwarKhan]

whay did you have to clean it..???

[car_bus2008]

Just Cleaned the Fog lights from inside as too much dust was present in Fogs and Also removed Yellowish Paper which was used for Foggy Weather from Fog Lights.

[FarhanAnwarKhan]

dust inside fogs means they are not sealed and when waters goes in the chrome will get damaged bro i have been through ir seal them with silicon glue i have done it and now its the 14th month going no dust no water and using hids...

[car_bus2008]

Thnx for your help bro but when i cleaned the fog lights i tested them by putting water inside them but there was no leak.

[FarhanAnwarKhan]

Thnx for your help bro but when i cleaned the fog lights i tested them by putting water inside them but there was no leak.

thats weird no water but dust...(A)

[FarhanAnwarKhan]

Also i am looking for the same tool kit mind sharing where and how much you got it for..??

[car_bus2008]

Bro bought it from Sialkot for Rs.2400 Name of Toolkit is Snowman