Toyota Corolla Model (E-120) 2002--2008 Owner's and Fan Club

[Hassan1991]

Group links not allowed.

[xenerking]

maf, excuse the dust, the hood is lifted only for oil changes

[ahmed_11]

Is anyone selling or knows someone who is selling original 14” rims of SE Saloon? (I’m in Lahore)

Found a clean set of SE Saloon Rims 14'' for 11K + 800 for JDM bolts - opp Islamia College Karachi Today noon. [image]

I know I can’t get lucky enough like @KamranAslam who bought these at throw away price but still

There is one set put up on OLX and the asking price is 35k.
I think the price is too high, how much do you guys think I should offer?

[xenerking]

only thing which should matter is condition of rims, repaired or not, straight or bent.

in gud condition should cost around 20-25 max

[ahmed_11]

Agreed.

I offered 25k & then 27k to the person but he is stuck on 33k.

[ahmed_11]

Aoa!

I’m new to this sensor voltage / reading stuff and specially bought multimeter for this keera.

Please see below readings and give your input.
The car is GLi 2007 (2NZ-FE), totally petrol driven and current odo at 259K.

1. Variable resistor / AFR ratio sensor:

1. MAF sesnor (Green middle wire)

1. MAF sensor IAT reading (yellow & black stripe wire)

Are these numbers in the ideal range? Or just okay? What can be done to bring these in the optimum range?

[ahmed_11]

No one..?

[helper_learner]

@hassan1991 Might be helpful as always

[Hassan1991]

Wailaikum Assalam
That's on engine off?
Although you can buy a cheap obd2 scanner and look for real time data.
For example a maf should be 1-3 g/s on idle.

[ahmed_11]

These readings are on engine ON, idle RPM.

I have ELM-327 (bought from Daraz last year but never used).
Will hook it up.
Can you please suggest any app which I can use with it?

[Hassan1991]

Car Scanner obd2 or Torque pro.

[ahmed_11]

Are these apps available on Apple App Store?
Or specific to Android only?

Also, please share any download link if you have

[Hassan1991]

Both are available on apple. But you will need an Elm327 with Wifi option to use iphone. Prefer using android.

[ahmed_11]

Noted.

Please let me know what parameters do I have to monitor?

[Hassan1991]

Maf g/s and injection m/s etc. Observe all of them and compare with service manual.

[mwaqar619]

Adjust variable resistor below or near 1.5

[ahmed_11]

Thanks Waqar.
Is there some formula according to which this is calculated?

[helper_learner]

Hook up the dm, set to resistance and set it.

If you want to calculate the optimal value you need to observe the Co and co2 ratio in exhaust.

[ahmed_11]

It shows no value when I set the meter to show resistance parameter.
The value of 2.43/2.44 only comes at the Voltage parameter.

[syncview]

sir jee, ab "itney" mei bhe yeh sab nahi hona