Toyota Corolla Model (E-120) 2002--2008 Owner's and Fan Club

[def3nder]

JUst wondering jab workshop me jate hain and they people check everything or sab kuch thek hota why dont the think of trim pot sensor? ya unko pata henahi hota k yeh b koi chez hoti hai

[waqar19]

Workshop walo se Allah bachaye. I do regular maintenance myself. From brake service to throttle body service. Very easy to maintain. Keep an eye on sensors using OBD bluetooth scan tool. I get some basic info.
While in local market sensor cleaning and tunning is done by expert electricians only.
Pictures attached below show instantaneous mileage in km/l at different RPMs and speed. While average mileage is 7.2 liter per 100 km. CO2 emmission and MAF values at different RPMs.

[def3nder]

While in local market sensor cleaning and tunning is done by expert electricians only.

Shukar hi koi tou hai jis ney yeh bat ki, coz if i need tunning i always go to electrician and people are like tum paglo ko asey kamo k lia tum electrician k pass jate ho :o kisi mistry ya mechanic ka kam hai yeh sab karna. But i dont listen to them..

Which OBD scanner you are using?

I didnt get these images for now. will look them later. IN my free time But anyways thanks

[waqar19]

Today DIY "Cracked Bumper Repairing using solder iron"

[def3nder]

Awesome, update us after color job is done.

[mohsin-212]

Which app is this?

[hasankhurshid29]

Which app is this?

Torque Pro

[mohsin-212]

So does it show km/lit also??

[hasankhurshid29]

So does it show km/lit also??

Yes but it is not accurate

[mohsin-212]

From where did you buy it??

[hasankhurshid29]

From where did you buy it??

First you have to buy obd2 adapter you can find on daraz then you will install torque pro in your smartphone and connect it through bluetooth

[naveedyu]

Can you please share the model number of OBD2 adopter which you are having. I have search daraz and found different obd 2 adopters in different price range. Which one you recommend. I have corolla 2008 and Grande 2018.
Thanks

[hasankhurshid29]

Can you please share the model number of OBD2 adopter which you are having. I have search daraz and found different obd 2 adopters in different price range. Which one you recommend. I have corolla 2008 and Grande 2018. Thanks

I am using a cheap obd2 which costed around 1000 rupees. Normally the obd2 does not connect because you need to add custom setting in the torque app. Without it you cannot connect to the ecu. I am telling this based on the experience on my corolla se saloon 2003

[hasankhurshid29]

You need to add these lines in torque app.
ATIB96\nATIIA13\nATSH8113F1\nATSP4\nATSW00

[hasankhurshid29]

I am using this adapter.

[naveedyu]

Thanks a lot for information and quick response

[def3nder]

is that any good? info thek batata sab ?

[hasankhurshid29]

The most useable parameter is the temperature sensor. Also if any CEL reported you can read then and there. I never used fuel average as the car runs on cng so injectors are stopped.

[def3nder]

btw hows ur car running? any issues so far after changing the oil grade? @mohsin-212 this guy is also using 20/50 in his 100k km driven 2005 1.8 altis. not happy with the engine performance and have issue in changing gears like transmission is taking long to shift to the next gear.

[hasankhurshid29]

btw hows ur car running? any issues so far after changing the oil grade? @mohsin-212 this guy is also using 20/50 in his 100k km driven 2005 1.8 altis. not happy with the engine performance and have issue in changing gears like transmission is taking long to shift to the next gear.

Every corolla of this gen owner having problem after more than 10 years despite the fact that the odo is not even close to 200k. But stilll...........