Toyota Vitz Owners/Fan Club

[pwuser149673550454]

Aslam O Alaikum every one, bought Vitz 2014, (Pre-Facelift), car is like 130000 done, Previous owner was using ZIC X5, which is I think is 20w-50. Car is giving very good average , should I keep on using this oil.

thanks in advance

[helper_learner]

It is very thick use 10w40 at max...

[pwuser149673550454]

Thanks

[ch.arsalanali0333]

Asslam o Alekum to all respected Members,
Recently i bought a vitz 2008 mod 1.3cc. it is a converted car from 1.0 cc
running a one. but now i am facing a problem... gari ko d me drivr kare slow par like speed is b/w 20 to 30 . accelerator se paon uthao to aik dum slow hu jaygi like i am applying brks. aur sudden slow hu jati hai. 20 ki speed se neche aur 30 se upar theek hai. aur jub D se S me gear shift karun to theek chalti hai.
Anyone can suggest me any good solution.

[dms664]

Guys need help regarding this code. Google is kinda vague regarding this. Anyone got knowledge and remedy of this. A friend vitz got this dtc.

[muhammadmubarik848]

Hello members, I've got a vitz 2017 f1.0, bought it just 2 weeks ago, the issue I'm facing is that when I release the accelerator pedal it feels like car is braking automatically, and prior to that I had vitz 2014 but never faced that issue, just wanna know that is this thing normal or is this really an issue??

[mdaniyal]

Dear PW, recently i changed the CVT gear fluid of my Vitz 2013, including hub and filter cleaning and replacement of hub seal. The mechanic poured full can of 4 litter but also keep pouring little more as "he don't see the oil coming out from intake hole", because there is no oil guage in the hub to check the poured oil quantity.
Probably this is the way he checked the oil quantity.

After couple of days the car is now start jerking when no paddle is pressed and keep jerking until press the paddle a little bit. Previously there were no this kind of jerk in the car.

Please suggest does he poured more amount of gear oil, or there is something else that need to be care about.

[ahmar.mirza]

intake hole u mean from where he was pouring the oil?
To check the oil level there is nut underneath in the oil chamber .. that must be open when pouring the oil and when the oil drips from there it means its full .... there are no dip sticks and that is the only way to know ... and there are multiple things to make sure while getting the cvt oil changed .. hope u got it changed from some experienced person?

[Thinking]

Ideally you should have poured back same amount of oil that came out of the sump to ensure same level.

Anyways the issue of vibration is probably associated with cleaning of throttle body and plugs and than resetting the ecu of the car by removing -ve terminal of the battery for 10 minutes

after reset car will re learn the idle position after usage of 1-2 days automatically.

[samueltamakloe]

can you please share the link again?

[Nabeel_Ali]

guys from can I find new engine mounts of vitz 2011 ksp130 1000cc?

in Lahore

[adnan.shaukat]

https://www.amayama.com/en/genuine-catalogs/epc/toyota-japan/vitz/ksp130/108951/engine/1107
Try this link, If you found new ones in Lahore, please let me know, I would also need

[rajaatta]

New one are Chinese not recommended at all.
Genuine engine foundation are far expensive timing side oil based mount is around 95000pkr now and the transmission side mount is around 49000pkr
Another and last one below the transmission the elbow type foundation is 26700pkr approxx
So why to invest that much amount you can find pretty decent ones in Bilal gunj just ask them to not sell you refill ones

[Nabeel_Ali]

Thanks a lot for the reply.
Can you send me any contact in Bilal gunj who deals in mounts?

[rajaatta]

Don't know some one there but you can contact Usama Syncview he is a good person and will arrange the said foundations

[Hassan1991]

If you want brand new then visit baadami bag, they have options to choose from like local, chinese ( not recommended by the member above) or "imported" .
In bilal gunj if you enter from the bike parking side (backside of data darbar). You will see horns shops in the entrance of the street, enter in that street, the second shop in your left deals in mounts.

[dms664]

I am getting p0104 code off and on. How to clean the map sensor on the vitz 2012? If this code is not for map sensor then guide me in correct direction please

[horticulturalist]

Which iridium spark plugs are good for vitz 3rd gen.?

[pwuser163188954128]

Aoa everyone. I have a 2002 vitz import2014 . It is a problem free car and well maintained . I needed ur suggestions whether to upgrade to a gli 1.6 vvti or a civic reborn hybrid and it will cost 5 lacks more....

[nawan885]

Dear colleagues as it has been discussed on this forum about engine oil consumption by 1KR FE vitz engine. My vitz 2013 110k driven used to consume 1.5 to 2L oil during 4000km interval. Routine check up and maintenance is by 3S dealership and as per technical staff nothing is abnormal and oil is 5w40 toyota Teflon since long. Can other members share their oil consumption experience and which oil is being consumed less so that I can understand my issue more clearly