TP Sensor

[mrahiliftikhar]

I need TP Sensor for Suzuki Cultus Model 2010 which i can easily adjust for 0.8 volts on scanner. If anyone have such Sensor then message me.
I tried many TP Sensor (Kabali from Pathan or some electrician) but no one give voltage higher than 0.68 on scanner.

[brownrose78]

Never rely on used/ Kabuli sensors. Buy from Suzuki 3S dealers for peace of mind

[mrahiliftikhar]

Contact 4 Suzuki Center but they all says that Now old shape Cultus Sensor not available

[syncview]

why do you want to set it at 0.8v?

[mrahiliftikhar]

Bcz it's standard value between 0.80 to 0.85 for better pickup and fuel average

[muflah]

Any particular reason? Even if the part number matches?

[mrahiliftikhar]

I asked from many person for Part number. But no body knows about TP Sensor part number. If you knows then tell me

[brownrose78]

Several reasons, firstly you don't know history. How much old or how was its performance. Might be it us faulty and waste your time and effort.

Secondly, Kabuli/ used market is full of Smuggled and stolen cars, products and thus indirectly and directly encourages illegal activities of stealing and smuggling.

[fusion.alive11]

Cultus sensors are very difficult to find, you have to try several kabli ones to see which one works best, I guess all the 1300cc and 1600cc variants had similar looking but different spec TP sensors so they dont work on 1000cc cultus. Whats wrong with the original one?

[mrahiliftikhar]

Fluctuations and less voltage generates

[fusion.alive11]

If the car is misfiring or changing RPMs then its an issue otherwise I would not recommend changing it. Find the one that runs smooth and forget about the volatage thing.

[muflah]

It should be on your older sensor. But if it was printed then there's a good chance you can't find it. I have had the same issues with one of my older cars, it was a 2007 cultus. I ended up buying a new (used) throttle body with its own sensors.