Which silicone for rear screen of cultus

[pwuser157223660331]

my cultus 2000 has kabli screen with wiper. there was dent in hatch for that screen was removed.
which silicon sealent is best for installing screen.

[suzukialtomehran]

Any ordinary clear silicon would be ok, back screen of cultus is held with few rubbers and without putting silicon on the corners it never sits perfectly in the channel. ask your denter to use wire or rope method which obviously he is going to use to get the rubber seal well seated on the inner channel.

[nnabeel]

Please when ever you get the work done, please make a video for posting here or on youtube or take pictures for records and education of many on this forum.

[abdurrahman.aamer95]

was digging your old post of cultus rebuild, i have cultus 06 and it gives rough idle especially when its raining and u drive past some water it will automatically raise its rpms im really frustrated about it and its giving 11 12km/l please guide me. the car has no issue whatsoever beside its usually parked for more than 4 days sometimes more. please guide

[abdurrahman.aamer95]

please help!

[pwuser157223660331]

try loosing the rpm screw. for raised rpms. if that doen't work then butterfly may be faulty.
rough idle due to rain could be due to moisture buiding on ignition system. remove wires and clean all the turminals. and check for rubber boots of ignition cables.

[abdurrahman.aamer95]

will do thanks. butterfly recently rebuilt upon request of a mechanic but it doesnt resolve the issue