Yamaha junoon different isses. Help required

[JUNOON007]

https://www.pakwheels.com/forums/bikes-3-wheelers/190249-my-new-yamaha-junoon-yd100-7
2nt comment ha bahi found this using google...and just read it over and it looks like the model hes got has got very very bad quality compared to our original Yamaha

Bhai g yah original model hay yamaha ka ap ko kis nay kaha k yah original nahin hay 2012 k bad jo model aya tha aho dyl wala tha

[muhammedahmed2]

acha acha many samja kay 2010 kay bad acha acha thanks for clearing it up for me

[Eur0_2]

help required from junoon owners.. feeling vibration on left side footrest right one is smooth .. kya waja ho sktee hai...??? @junoon

[rizwan4340]

help required from junoon owners.. feeling vibration on left side footrest right one is smooth .. kya waja ho sktee hai...??? @junoon

Make sure you are not touching the gear lever. But i am not sure about the actual reason. May be some kind of bad material of foot rest pad or a loosen joint . Get it checked from proper mechanic.

[saboor73]

help required from junoon owners.. feeling vibration on left side footrest right one is smooth .. kya waja ho sktee hai...??? @junoon

is there any guar guar gaur sound while riding

[saboor73]

help required from junoon owners.. feeling vibration on left side footrest right one is smooth .. kya waja ho sktee hai...??? @junoon

did you got it aligned from welder

[Eur0_2]

did you got it aligned from welder

phly sa he theek ha .. sb kuch..

[Eur0_2]

is there any guar guar gaur sound while riding

nope ........

[saboor73]

nope ........

post a pic of the foot rest

[Eur0_2]

post a pic of the foot rest

sure will show tomorrow...

[muhammedahmed2]

havent posted in thread in long time got my bike repaired today had original clutchplates and pressure plates installed the mechanic was saying that drive slow of atleast 1500km because of clutch plates....wanted some info from rizwan bahi ya JUNOON007 bahi about when you guys had your clutch-plates changed did you have to drive slow aswell or is the mechanic preventing me from checking the bike for full potential?

[muhammedahmed2]

he also put 1 liter in bike said that it will help the clutchplates to settle in? noticed some missing from bike after all this he put honda 125 oil

[saboor73]

havent posted in thread in long time got my bike repaired today had original clutchplates and pressure plates installed the mechanic was saying that drive slow of atleast 1500km because of clutch plates....wanted some info from rizwan bahi ya JUNOON007 bahi about when you guys had your clutch-plates changed did you have to drive slow aswell or is the mechanic preventing me from checking the bike for full potential?

I have never heard of break in period of clutch plates

[saboor73]

he also put 1 liter in bike said that it will help the clutchplates to settle in? noticed some missing from bike after all this he put honda 125 oil

drain the oil as soon as possible 1l oil is to much for junoon 0.8l is recommend oil and u should not use more than that

[JUNOON007]

havent posted in thread in long time got my bike repaired today had original clutchplates and pressure plates installed the mechanic was saying that drive slow of atleast 1500km because of clutch plates....wanted some info from rizwan bahi ya JUNOON007 bahi about when you guys had your clutch-plates changed did you have to drive slow aswell or is the mechanic preventing me from checking the bike for full potential?

My bikes is in complete genuine condition almost 33k drived not spend a single rupee on engine and clutch plates not need 1500km running time and 200 ml oil immedietly it needs only 800ml oil

[rizwan4340]

he also put 1 liter in bike said that it will help the clutchplates to settle in? noticed some missing from bike after all this he put honda 125 oil

Sorry boss i am at job right now. Yes 1 liter oil ia normal actually after opening the engine side covers tgey use to pour 1 Liter oil in it. My mechanic didn't warn me for speed limits after changing clutch plates. But issue is i have changed clutch plates twice. But never thos presure plates. So i am not sure about speed limit but its ok keep in limit of 50 for firat 300 to 500 then increse it to 60 70 .. but don't go for 80 90 km/h.

[muhammedahmed2]

thanks guys really helped but yeah im going for break in period for at least 200km

[Eur0_2]

today morning i checked my jun00n oil level on dipstick... without tight.... i don't know this oil level is oky or not..coz don't have enough knowledge about junoon... .. recently changed clutch plates and filled with dyl lube...08ml. so plz tell me about oil level.

[saboor73]

today morning i checked my jun00n oil level on dipstick... without tight.... i don't know this oil level is oky or not..coz don't have enough knowledge about junoon... .. recently changed clutch plates and filled with dyl lube...08ml. so plz tell me about oil level.

your dip stick is different from the one I had in my junoon was I can not understand it it should have mark I see two mark so either the bike is running with half oil or full what method you used to change oil correct method is to remove dip stick wash the oil with simple cloth and put it back and remove it and check oil level

[muhammedahmed2]

can you tell me how much the clutch plates cost you and if you have noticed any difference in pick before my clutch plates went kaput my bike was reaching easily 90-95 cruising speed and top speed was showing on meter 100+ havent yet checked with gps but now after clutchplates change bike is hardly reaching 80-85 cruising speed and barely touches 90 i got everything orignal but 1 thing was CMX mecanic said it was better than original but i think he might be lieing as cmx is china i think. euro 2 if you could share some knowledge and oil is i think fine but i cant really tell because on my bike oil stick is showing same even tho i put 1 liter oil in it