Yamaha YB 125Z Owners Fan Club

[boldpisces]

Thank you. I been playing with lot of different bikes since 96/97 and it's been almost two decades now. My first bike where I started learning to drive was Kawasaki with similar gear shifting patterns of Yamaha. Comfort and fuel average of this Yamaha YB 125z is 10/10. It's almost a Maintainance free bike. You don't need to find anyone for paint or wheel balancing right after purchase. It's just perfect as it is and I am not going to change anything. I will prefer to keep everything as stock. I just purchased it for small tasks where you don't need to get your car out. It's a great ride.

[pwuser150295624152]

[rizwan_ch8]

Ye baaaaat.....
Yamaha waly kehty hain k tunning gap zada rakho lkn hota ye hy k bike jan chorna start ho jate hy... mri bike 1500+ km ho gy tune kiye hwy ess waja se bike ab noise ker raha hy clutch ma power kam ho rahe hy... 5th gear ma zore kam ho raha hy.... means pick kam ho re hy....
Kal ma tune krwao ga bike ko ore next time 1500km se pehly e tunning kerwa liya kro ga.
@awaiz43 aap ki bike k sath b kuch assy e issues thy na jou tunning k bad sahee ho gy??

[awaiz43]

Vinyle k leay guide kro maine b krni hy. Or share some pics of ur bike.

[awaiz43]

Bilkul aisa hoa hy. Maine 2nd tune 3000 pe kraya tha pr 6000 se phle mje phir setting krani pre. Pr issue yeh tha k 2nd tuning wale ne bike ko complete tune nahi kea tha is wja se jaldi zrorat pri tuning.

[pwuser150295624152]

Vinyl import ki ha bro. Total kharcha 4 thousand will upload pics soon

[awaiz43]

3000 tk tu waise b exprnse ho jata hy. Koi lahore se hy yaha maine suna hy lahore mai 3m vinyle krty hyn bikes pe.

[ammarweb2]

Malik Attiq, apne YBZ ki safeguard fitting ki pics to upload karo.. Ye CG wala safeguard kis tarha lagaya?

[clevever]

Bhai gee tuning ki zaroorat jaldi iss liya parti hy kin k hum log routine setting nahi karna jaantey. We should learn some basics of a bike setting so that we can make the changes as we need.
Some tips....
1.air pressure check regularly
2. Mix Hi octane on every 2nd refilling
3. Check plug and learn about it's color reading and ajdust the mixture as if it need some adjustment.
4. Use carburetor cleaner through its air intake chamber (learn how to use it before use it).
5. Lubricate cables regularly.
6. Take ur bike for tappet adjustment to a mechanic if needed .
7. Change ur bike's oil on time.
8. Clean the air filter regularly.
That's all if u know how to deal with these things performance of ur bike will never let you down.

[awaiz43]

Kindly share the procedure how to clean carburator with air intake my bike dsnt need it but i want to know for knowledge.

[clevever]

There r many videos on youtube.
Open the air filter box spry the carburetor cleaner through the hole from wher the carburetor suck air make sure that the bike is heat up and race up the accelerator while spraying the cleaner. You will notice the smell of burning liquid gas discharged from Silencer.
Note that do this just 3 to 4 sprays access of spraying cleaner can damage the rubber or plastic parts if any used in the carburetor or can be harmful for the ring piston.
This is just for cleaning the air ways not to wash the carburetor .

[awaiz43]

Which brand and product is used for carburator cleaning . And i have another question one of my frnd want to know this. He onws ybr and once he drove his bike while the screw of carburator towards engine was loss i mean carburator was not properly fixes frm engine side. Now i want to know if he needs to clean valves or not. If yes how can he clean the valves without opening the head. He thinks driving the bike with loss carburator may coz dust into the head chamber.

[pwuser149548447287]

Bike ki chain ya garari say kir kir ki awaz aati hai kia prblm ho sakti hai aur engine oil suggest plz

[clevever]

Remember one thing if the screw get loose and engine suck air it is not posible for it to maintain pressure and the bike cannot start or the sound should change it depend on the gap which is created by loosened screw. If the bike remain start with it then there is nothing to be worried about.
There are many brands of carb cleaners and all are almost same take anyone just test it while purchasing by spraying it a little bit on hand that how much it is cool and how fast it dried. The cooler it is and the faster it dries the best it is......simple
Beware of the safety instructions coz it is harmful and vary much flammable material.

[clevever]

Chain ko adjust karwao bhai.
Oil wese yamalube hi best hy warranty period mein otherwise i suggest zic x5 the best choice.

[rizwan_ch8]

Bolt lamby lagy gy ore ho jay ga fit... very simple.

[clevever]

Plz put sum rubber sheet in between this clunp or it will ruins your frame...

[awaiz43]

Thanks

[awaiz43]

Waiting for pics and detail for vinyle.

[rizwan_ch8]

Okay.... sir