2007 Honda Civic ivtec manual cruise control

[ShaMaaL]

well described ,thumbs up , wish somebody do it in manual rolla too!

Thanks.

[rkhnsh]

Congrats @SHamaaL... u r redefining ur Honda, u r doing one hell of a great job.. im always available for ny kind of assistance.. i dnt hv enough knowledge about the cruise control thing bt glad to see dt its working fine...

[talha_hanif]

@ShamaaL,

Well Done Bro.

Waiting for your Call Bro.... I need some assistance regarding installing Cruise in my Reborn

[zunny]

bump for Fouadbakht!!

[fouadbakht]

Thank You Zunny and ShaMaal both.........
[I]For Unleashing the Keera In Me

[/I]Both of you keep your cellphones charged with spare batteries

[HellsGuardian]

its ecu already has the functionality or implied the control using some other components?

[zunny]

its ecu already has the functionality or implied the control using some other components?

ECU is already compatible.no need to do anything less hooking up the extra wires!! all the best just take the 1st step and ready steady go!! as the new gen civic is having CC standard we all would soon be getting more used to this feature !! the 9th gen is quite expensive so do all the sashkas in ur 8th gen n stay satisfied lolz

[HellsGuardian]

ECU is already compatible.no need to do anything less hooking up the extra wires!! all the best just take the 1st step and ready steady go!! as the new gen civic is having CC standard we all would soon be getting more used to this feature !! the 9th gen is quite expensive so do all the sashkas in ur 8th gen n stay satisfied lolz

i have a 2005 vti oriel... does this model also have CC compatible ecu?
on a side note, i am not getting whos car is this and who did what
u or the original poster

[STUNNER]

very nice job done!!!

[palm]

great work done sir g,
well AHL is not offering CC in non-oriel model. can we install cc in that?

[vicentelinhares]

Hello friend, you can give me a hand?

I made this tutorial as a network installation.
When I turn on the light button Cruize cruize MAIN lights, but when I press the SET button activates the cruise not.
I did the diagnostic panel and when I press every button of an audible signal (beep), then I think that all wires are connected correctly. (I also tested it with a multimeter)
I connected the wire in a clutch pin switch and the other on the ground. I connected the brake switch on one pin and the other on the thin yellow wire from the fuse box (First of 3 sockets).
Will my ECU here in Brazil is not compatible? Or did something wrong?

[zunny]

Hello friend, you can give me a hand?

I made this tutorial as a network installation.
When I turn on the light button Cruize cruize MAIN lights, but when I press the SET button activates the cruise not.
I did the diagnostic panel and when I press every button of an audible signal (beep), then I think that all wires are connected correctly. (I also tested it with a multimeter)
I connected the wire in a clutch pin switch and the other on the ground. I connected the brake switch on one pin and the other on the thin yellow wire from the fuse box (First of 3 sockets).
Will my ECU here in Brazil is not compatible? Or did something wrong?

check if cruise control compatible vehicles have same ECU as your car. if its same then we take it from here. try reversing wires on the clutch switch

[mwm749]

This must be the 1st car in the world to have cruise control + manual transmission.....LOL

[mwm749]

Hey, put it up for Guinness World Record.

[zunny]

^^^^ cruise control in manuals has been around for decades!

[galvanille]

Salam.. I had been reading this post. Great post!!.. do you have their manual?. btw, Im from Malaysia

[thiagobangu]

Vicentelinhares Hello, I am also from Brazil and I'm in the same boat you, and ask for help to his friend Shamaal or zuny to help us,

Ja did the links in the speedometer panel, and turned on the light of the cruise control, did the links of pedals which looked like this

Clutch Pedal: 2 wires, one coming from the ECU 41 positive signal connected the yellow wire.
Brake Pedal :: 4 wires, 1 from the position 39 ECU negative signal connected the yellow wire.
Conclusion, nothing works yet.
Do we need to do something else?
The ECU sends 39 position minus sign it?
The ECU sends 41 position positive sign it?

Help us Shammall or Zuny?

[thiagobangu]

Vicentelinhares Hello, I am also from Brazil and I'm in the same boat you, and ask for help to his friend Shamaal or zuny to help us,

Ja did the links in the speedometer panel, and turned on the light of the cruise control, did the links of pedals which looked like this

Clutch Pedal: 2 wires, one coming from the ECU 41 positive signal connected the yellow wire.
Brake Pedal :: 4 wires, 1 from the position 39 ECU negative signal connected the yellow wire.
Conclusion, nothing works yet.
Do we need to do something else?
The ECU sends 39 position minus sign it?
The ECU sends 41 position positive sign it?

Help us Shammall or Zuny?

Hello friend, you can give me a hand?

I made this tutorial as a network installation.
When I turn on the light button Cruize cruize MAIN lights, but when I press the SET button activates the cruise not.
I did the diagnostic panel and when I press every button of an audible signal (beep), then I think that all wires are connected correctly. (I also tested it with a multimeter)
I connected the wire in a clutch pin switch and the other on the ground. I connected the brake switch on one pin and the other on the thin yellow wire from the fuse box (First of 3 sockets).
Will my ECU here in Brazil is not compatible? Or did something wrong?

[ag3ntx]

Dear Shamal. I am trying to install cruise control in my 2010 oriel prosmatec. I bought a cluster from bilal ganj which came out of a japanese civic. The part number was 78200 SNL Z800. But unfortunately it didnt have the cruise control lights/functions. Can you guide me how to check for the cruise function wether present or not. Or maybe you can qoute the part number of the cluster you have installed in your civic. Regards

[pwuser153247015751]

Hı. I am Fatih. I have a Civic 1.8 fd7 i-vtec manual transmission tool. I want to do cruise control. I have a steering knob. The audio control button is working. There is a brake switch. There is a clutch switch. There is a point I do not understand. I do not fully understand the brake switch 4. Will I make an attachment to the yellow cable in the MICU terminal, or an empty socket in the terminal? Can you help me?