93 Nissan Sunny B13 Engine Swap

[dani_kk]

hahaha dude I know thats a big gamble but I will come to pindi to inspect the engine, think like this qg15 in karachi is for 80K which was not in so good condition, and If I get qg15 (in good consition) in pindi lets say for 60k and transport charges 10 to 15k and I come there to inspect it lets 5 to 7k I think It is going to be ok? what are your thoughts?

thanks man I will contact them tomorrow. are you sure regarding the prices that it will be 50-55k because I will not be able to give them my engine...

Yes 50-55k would be your bargain range.
And yeah engine lekar janay ka no issue.
Puri garian chali jati hain yar.

Ap yahan ayen engine pasand karen.

Sent from my SM-G360H using PW Forums mobile app

[dani_kk]

Dono ko mera naam quote karna
khush hokar mujhay discount dete hain kay humara promo chalata hai net pe

Sent from my SM-G360H using PW Forums mobile app

[raja_shahbaz]

Yes 50-55k would be your bargain range.
And yeah engine lekar janay ka no issue.
Puri garian chali jati hain yar.

Ap yahan ayen engine pasand karen.

Sent from my SM-G360H using PW Forums mobile app

ok dude that seems good option, ab kuch tips bhi bataden to check the engine and computer??

Dono ko mera naam quote karna
 khush hokar mujhay discount dete hain kay humara promo chalata hai net pe

Sent from my SM-G360H using PW Forums mobile app

hahahah ok kal baat kar k bataonga ap ko INSHALLAH. naam dani bataon ya Daniyal hehe?

[dani_kk]

ok dude that seems good option, ab kuch tips bhi bataden to check the engine and computer??

hahahah ok kal baat kar k bataonga ap ko INSHALLAH. naam dani bataon ya Daniyal hehe?

Simple option is buy a engine compression tester. It's for 2000 rs and one by one sab plug remove karen and tell the scrappie chotas kay yar tum sab ko 150each dunga teen larkay hain.
And tumnay crank pulley ko round dene hain.

So basically pressure should be more than 160+ for good engine.

And then rubber pipes, sensors tootay na hon, cut cheezen sab belts sab kuch saaf suthra lena
And then tell him u want to test the computer
He will take u to ameer
Kehna ap 200 deingay for computer testing.
So yeh testing approach mein sab sensor verify hojayengay. Lazmi koi na koi swapped gari wahan khari hoti hai jispe apko sensors, coils sab verify kara deingay.

Sabko manage karen motivate karen by offering money. Offering money is the only way to give u unbiased test results.

And then you'll be good to take the engine to hyd

Sent from my SM-G360H using PW Forums mobile app

[dani_kk]

ok dude that seems good option, ab kuch tips bhi bataden to check the engine and computer??

hahahah ok kal baat kar k bataonga ap ko INSHALLAH. naam dani bataon ya Daniyal hehe?

Haha danyal kehna turbo b11 wala danyal the swap king of Rawalpindi samjh jayengay

Sent from my SM-G360H using PW Forums mobile app

[dani_kk]

ok dude that seems good option, ab kuch tips bhi bataden to check the engine and computer??

hahahah ok kal baat kar k bataonga ap ko INSHALLAH. naam dani bataon ya Daniyal hehe?

Plus wiring ameer se banwa lena he will charge u 2k.
Kehna usko cut nai karna kuch
Relay on karni hai
And fuel pump relay har cheez jo jo ap. Usko kahengay usko wires nikal kar deni hain.

Sent from my SM-G360H using PW Forums mobile app

[raja_shahbaz]

Simple option is buy a engine compression tester. It's for 2000 rs and one by one sab plug remove karen and tell the scrappie chotas kay yar tum sab ko 150each dunga teen larkay hain.
And tumnay crank pulley ko round dene hain.

So basically pressure should be more than 160+ for good engine.

And then rubber pipes, sensors tootay na hon, cut cheezen sab belts sab kuch saaf suthra lena
And then tell him u want to test the computer
He will take u to ameer
Kehna ap 200 deingay for computer testing.
So yeh testing approach mein sab sensor verify hojayengay. Lazmi koi na koi swapped gari wahan khari hoti hai jispe apko sensors, coils sab verify kara deingay.

Sabko manage karen motivate karen by offering money. Offering money is the only way to give u unbiased test results.

And then you'll be good to take the engine to hyd

Sent from my SM-G360H using PW Forums mobile app

compression tester is not available here. plus when I went to karachi all the pipes on engine were cut, what if pipes are cut there too? and what about the airfilter housing, will that be included with the engine?

[raja_shahbaz]

Plus wiring ameer se banwa lena he will charge u 2k.
Kehna usko cut nai karna kuch
Relay on karni hai
And fuel pump relay har cheez jo jo ap. Usko kahengay usko wires nikal kar deni hain.

Sent from my SM-G360H using PW Forums mobile app

wow that will be even nice...

[raja_shahbaz]

@isbcap can you post a picture of your ECU so that I can see which ecu is for QG15DE??

[dani_kk]

@isbcap can you post a picture of your ECU so that I can see which ecu is for QG15DE??

When i had QG15 i got
A5 STAMPED ON IT
AND A7 ALSO WORKED FINE.

If you get any other ecu then u may get intake air temp sensor error. For which u have to hold the throttle in morning for sometime else if u let it idle it will turn off. This role is of iat if cs is 100% ok

Sent from my SM-G360H using PW Forums mobile app

[raja_shahbaz]

well after some thinking and discussion I think I should drop the Idea of QG and simply get GA15. will save me from all the hassle....

[IsbCap]

well after some thinking and discussion I think I should drop the Idea of QG and simply get GA15. will save me from all the hassle....

Not really. U have to wire up GA15 as well. Mine is ZZ ECU. It shows intake air temp error. But this doesn't cause the RPM drop or vibration issues.

If IACV is working fine, this shouldn't be any issue.

GA is old generation engine, so not recommended

[raja_shahbaz]

Not really. U have to wire up GA15 as well. Mine is ZZ ECU. It shows intake air temp error. But this doesn't cause the RPM drop or vibration issues.

If IACV is working fine, this shouldn't be any issue.

GA is old generation engine, so not recommended

wirring is not the hassel I am talking about, no good QG is available near me, cant come to pindi

[FBB]

wirring is not the hassel I am talking about, no good QG is available near me, cant come to pindi

Place the order to the kabaria and he will deliver it to you in karachi. If you are really serious about swapping go for QG only. GA engines production stopped by Nissan in year 2000 and onward from 2001 they are producing QG series.
If you get the most recent model to woh bhi 17 years purana hoga, QG mein phir bhi chance hai k you will get some 2008 model or above.

Sent from my Z12 using Tapatalk

[raja_shahbaz]

Place the order to the kabaria and he will deliver it to you in karachi. If you are really serious about swapping go for QG only. GA engines production stopped by Nissan in year 2000 and onward from 2001 they are producing QG series.
If you get the most recent model to woh bhi 17 years purana hoga, QG mein phir bhi chance hai k you will get some 2008 model or above.

Sent from my Z12 using Tapatalk

are you sure the scrappie is believeable? what if I get a messed up engine and wiring, then that will be even a big problem...

Sent from my HUAWEI VNS-L21 using PW Forums mobile app

[star2]

are you sure the scrappie is believeable? what if I get a messed up engine and wiring, then that will be even a big problem...

Sent from my HUAWEI VNS-L21 using PW Forums mobile app

Wiring key ilawa, there are loads of mechanical issues on QG as well while swapping in B13. If you are not able to find a good QG there, how would you be able to find the perfect axles needed for it which fit end to end without any alteration. What about suspension overhaul, moutings and how would you be able to fix the gear lever issue if you go for a manual transmission. You need knowledge at hand for the swap of QG into a B13. The jugaro fuel pump installation is a dumbass procedure as well. Go find a good GA, a complete one, you would be able to find, for a good engine, max issue is throttle body it gives all sorts of issues, can be changed at the expense of 4-5k, @fbb or @dani_kk would be able to send you that. Plenty of stuff regarding GA on internet like manuals. You can fix that up rather easily.

[dani_kk]

Wiring key ilawa, there are loads of mechanical issues on QG as well while swapping in B13. If you are not able to find a good QG there, how would you be able to find the perfect axles needed for it which fit end to end without any alteration. What about suspension overhaul, moutings and how would you be able to fix the gear lever issue if you go for a manual transmission. You need knowledge at hand for the swap of QG into a B13. The jugaro fuel pump installation is a dumbass procedure as well. Go find a good GA, a complete one, you would be able to find, for a good engine, max issue is throttle body it gives all sorts of issues, can be changed at the expense of 4-5k, @fbb or @dani_kk would be able to send you that. Plenty of stuff regarding GA on internet like manuals. You can fix that up rather easily.

As @star2 said hassle toh hoga.due to limited parts availability.
Bring your car here in a container yahan se QG lagwa lein ya phir wahan pe Ga mangwa lein.

Sent from my SM-G360H using PW Forums mobile app

[raja_shahbaz]

Wiring key ilawa, there are loads of mechanical issues on QG as well while swapping in B13. If you are not able to find a good QG there, how would you be able to find the perfect axles needed for it which fit end to end without any alteration. What about suspension overhaul, moutings and how would you be able to fix the gear lever issue if you go for a manual transmission. You need knowledge at hand for the swap of QG into a B13. The jugaro fuel pump installation is a dumbass procedure as well. Go find a good GA, a complete one, you would be able to find, for a good engine, max issue is throttle body it gives all sorts of issues, can be changed at the expense of 4-5k, @fbb or @dani_kk would be able to send you that. Plenty of stuff regarding GA on internet like manuals. You can fix that up rather easily.

first of all, welcome to the thread, secondly I thought you will be encouraging me for the QG swap... but you are rather scaring me

Sent from my HUAWEI VNS-L21 using PW Forums mobile app

[raja_shahbaz]

As @star2 said hassle toh hoga.due to limited parts availability.
Bring your car here in a container yahan se QG lagwa lein ya phir wahan pe Ga mangwa lein.

Sent from my SM-G360H using PW Forums mobile app

hahah yaar main thing is a good base.. a good qg block other things can be arranged with some difficulty... and @star2 regarding axles if tranny is same as of cd17 how can axles be a big issue?

Sent from my HUAWEI VNS-L21 using PW Forums mobile app

[star2]

hahah yaar main thing is a good base.. a good qg block other things can be arranged with some difficulty... and @star2 regarding axles if tranny is same as of cd17 how can axles be a big issue?

Sent from my HUAWEI VNS-L21 using PW Forums mobile app

you are planning a cd17 tranny with QG?