Alto VXR 2008 - my first company car

[helper_learner]

You can buy like this one, https://www.daraz.pk/products/95mm-rpm-tachometer-car-gauge-blue-colors-auto-tacho-gauge-0-8000-rpm-meter-high-speed-stepper-motor-with-shift-light-for-peak-warning-i197246908.html

[sleeper]

Where/what does it connects to?

[helper_learner]

[sleeper]

Right now its not even that much sunlight in Karachi, but still the shit AC wont work at all... Keeps tripping, then for 5 mins doesn't switch on at all... Then switches on and after 10 secs again off and then bye bye AC.....this all happens only when sun is shining on top, be it cool sunlight of winters even... just allergic to sunlight i guess.

Why is this happening what needs to be done?

[sleeper]

I bought another similar gauge from daraz and it has these wires... My electrician installed it in the car, however only its light is working but not the gauge.. apparently its not getting pulse frm distributor wire..

Is there any specific\proper connection that need to be made?
Can anyone guide which wire connects where so that I can tell electrician accordingly.

[Massive_One]

Right now its not even that much sunlight in Karachi, but still the shit AC wont work at all... Keeps tripping, then for 5 mins doesn't switch on at all... Then switches on and after 10 secs again off and then bye bye AC.....this all happens only when sun is shining on top, be it cool sunlight of winters even... just allergic to sunlight i guess.

Why is this happening what needs to be done?

watch MS Autos youtube channel, the guy uploads videos regarding his shop fixing A/C issues, perhaps you can visit him for the solution.

[helper_learner]

Is there any specific\proper connection that need to be made

Plz, cross check the connections', It There seems to be a problem with Green wire.

[sleeper]

Will check.

Last night the back light was working, but the light on its pointer turns off after 1 min of car starting, and stays off

[brownrose78]

You can visit Electrician Maani for making it functional

[sleeper]

If in Khi then where is he available?

[helper_learner]

If in Khi then where is he available?

Following post is by @brownrose78,

Suzuki Khyber 1989 Restoration

For electric work, I also rely on electrician suggested by @omersiddiqui5482 to me, that's Auto Electrician Maani at near Sagheer Centre opposite to Luckyone.

Complete post can be seen here

[sleeper]

Got it 🏼🏼

[sleeper]

Anyone knows for headlight beam adjustment, which screw\gear is rotated for beam up and down.

There are 2 on each light... One screw\gear is approached from straight top, and the other is approached frm top too, but diagonally.

[helper_learner]

Anyone knows for headlight beam adjustment, which screw\gear is rotated for beam up and down.

There are 2 on each light... One screw\gear is approached from straight top, and the other is approached frm top too, but diagonally.

How to Adjust Alto VXR Low Beam

How to Adjust Head Light of ALTO VXR ??... ??

[sleeper]

Off topic, since City thread is not that active.

Some idiot threw some shit(diaper) probably from their balcony onto our car bonnet... apparently the city is their garbage can​

I got it cleaned from the service station, but the nishaan(stains) are still there, as seen from an angle in the pic below...can anyone advise how can it be cleaned properly so that it doesnt looks bad.

[nfssaad]

it will need some slight compounding.

[sleeper]

Thanks.. any idea, where in Khi this is possible? Hope its not expensive.

Is there any risk of leaving it as it is? Would it get permanent?

[nfssaad]

it looks like clear coat or polish damage due to acidic nature of human excrement.

majority of painters can do rubbing/compounding

[sleeper]

Got it.. if i delay this, will it get permanent and hard to clean later?

[nfssaad]

washing with plenty of water should get rid of the acidic effect.. but better to get it done asap.

better to take opinion of professional painters first