Ask Xulfiqar - An Automotive Encyclopedia

[haider_ciit]

bro can i use Liqui Moly ATF III?

measure what drains out - adjust quantity by measuring dipstick. There is no viscosity to be measured, its only ONE product.

[ammadd]

@xulfiqar
AOA, I have Honda Civic 2003 VTI Oriel (Manual). I am having a little issue with RPM that i need advise for.
* My Cars idle RPM is 800 as usual but when i try to accelerate RPM doesn't look stable and car gives little jerks when moving from rest to motion. Specially when i am in a rush it becomes a headache. I need to move at very little speed at rush and 1st gear is on car gives jerks and RPM fluctuating little bit so i have to keep my foot on clutch. I am not sure what's happening please help. I got throttle body cleaned but still same. Also when AC turned on RPM not increasing too at idle. Also,When i am changing gear at 2nd/3rd gear and press clutch the RPM drops to 1000 so car is not smooth enough at gear change too.. What could be issue ?
(I will wait for your response please reply whenever free)

[abid110]

Is the oil change interval of a carby mehran under 30k km on odo will be 5k km too? Which oil u recommend wrt khi conditions?

[Xulfiqar]

bro can i use Liqui Moly ATF III?

no, you need a friction modified ATF like the one meguin and Liqui moly sell - it will have a list of equivalency ATF on the back of the bottle.

LM ATF III is dexron III clone - same as caltex texamatic and wont work correct.

[Mirza967]

@Xulfiqar Aoa......sir i want to ask just for knowledge that what is the purpose of a small hole in exhaust port of 2 stroke...mechanics usually dont clean it as its usually clogged....i am talking wid reference of yb100.

bump @xulfiqar

[saboor73]

Is the oil change interval of a carby mehran under 30k km on odo will be 5k km too? Which oil u recommend wrt khi conditions?

Change oil at 3.5k km max use Suzuki SGP api SG one

[abid110]

Change oil at 3.5k km max use Suzuki SGP api SG one

Wohi oil jo me liana me daalta hun ? . 3500 kamm nahi hai ??? Koi khaas wajha?

[saboor73]

bump @xulfiqar

It is to drain water (in extreme cold weather exhaust gases some time condense)

[saboor73]

Wohi oil jo me liana me daalta hun ? . 3500 kamm nahi hai ??? Koi khaas wajha?

Jee wohi
3.5k km because mehran sump is very small and oil ventilation isn't good in mehran (oil get dirty soon)

[sheikhmunda97]

Asalam o Alikum..!
sir i have a suzuki cervo with turbocharged engine and my car is almost 90k on odo which engine oil is good for it??

Sent from my SM-G530H using PW Forums mobile app

[Xulfiqar]

bump @Xulfiqar

as mentioned - its for water condensate, such hole is also found in almost all motorcycles and its even found on most cars too.

[Mirza967]

@xulfiqar @saboor73 Thank you

[sheikhmunda97]

Asalam o Alikum..!
sir i have a suzuki cervo with turbocharged engine and my car is almost 90k on odo which engine oil is good for it??

Sent from my SM-G530H using PW Forums mobile app

@xulfiqar

Sent from my SM-G530H using PW Forums mobile app

[zahidsandhu223]

Aoa Xulfiqar Bro... I have Vitz 2009 Model. I changed its Plugs With NGK IRIDIUM LFR6AIX - 11
I am so Worried coz Original was DENSO IRIDIUM SK20HR11.
Now what I should do. Please Help me

@xulfiqar

[siraj_7]

nitrogen is used for purging, not flushing - flushing is done with a liquid like acetone or CTC or similar. To see real problems you need to measure the high side pressure of the running system. Its impossible to detect and anomaly with just a low side gauge, Replace your mechanic if he doesnt know whats going on.

btw - make sure the drier you placed in the liquid line is not choked or damaged as that can cause high load on the compressor with bad heat exchange in the evaporator (it will starve the evaporator - which will show up as low cooling on partial evaporator surface)

I find it odd that your mechanic cannot find the problem, its very simple analysis with correct tools. Why doesnt he use a high side gauge? Every split A/C unit has a high side connector port near the block valves.

@xulfiqar

Yes i meant nitrogen cycle to purge any moisture in lines...

Yes the AC Guy has dismanteled and taken all parts at his shop to test thoroughly as AC is not cooling at all. There is a possible choke somewhere as needle on the pressure gauge fluctuates alot.

In most 1ton and 1.5 ton units there is only a connector port on the suction line and no port on the liquid line, thats why the guage can only be connected on suction line from where they charge the ac as well. port on the liquid line is in bigger capacity units only.

[qaisar560]

salam to all
i have altis 2010
its stearing assembly giving sound.
what you ppl suggest, should i change it with qabli or repair it from any tool shop?
which is more reliable
thanks

[sheikhmunda97]

@xulfiqar

Sent from my SM-G530H using PW Forums mobile app

Bump

Sent from my SM-G530H using PW Forums mobile app

[saboor73]

Bump

Sent from my SM-G530H using PW Forums mobile app

K6a turbo?

[aamirahsan89]

salam to all
i have altis 2010
its stearing assembly giving sound.
what you ppl suggest, should i change it with qabli or repair it from any tool shop?
which is more reliable
thanks

Repair it from a reputable place

Sent from my HTC One using PW Forums mobile app

[sheikhmunda97]

K6a turbo?

yes

Sent from my SM-G530H using PW Forums mobile app