Car Care and Detailing Dreams (Part 3)

[bym007]

I wasn't looking for 100% finish, as the car is daily driven and sees a lot of highway miles, so it would be back in similar situation within a few months.

Furthermore, there are a few stone chips to take care of. I will attend to the stone chips in a few days, when time allows.

The important thing is one should know, when to stop chasing perfection.
.

[bym007]

Post Polishing Results
.

[bym007]

Another angle
.

[bym007]

Next steps

I will apply Soft99 Fusso Coat (12 month protection sealant) on it and will be sharing results shortly.

[bym007]

Beading Check

This is a beading check before I removed the wax for fresh application.

Soft99 Fusso Coat was applied on hood + front windshield of the car around 4 months back. It is showing good beading and excellent hydrophobic properties.

The rest of the car was protected with Menzerna PLUP, topped with Collinite 845 about 11 months back. There is se hydrophobic behaviour, but it needs to be re-applied at this point.

https://www.facebook.com/groups/1686601831593578/permalink/2806965859557164/

[adil5855]

Tonyin wax applied only

[saad310799]

Nice

[bym007]

Soft99 Fusso Coat and Soft99 Authentic experience

[bym007]

Final Results: Soft99 Authentic wax
.

.

[bym007]

Final Results: Soft99 Authentic wax
.

.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[ifadey]

Have a question.

If we do the Ceramic coat on vehicle, then itsgood at-least for 1 year. It remain hydrophobic and also resist dust also.

But if after 1 week or 1 month of Ceramic coat,if we want to remove it, then what can be the appropriate procedure to removethe Ceramic coat?

Depends on the coating used. Most of the coatings can be removed using polish or compound in some cases.
But some professional grade coatings require sanding.

[bym007]

Have a question.

If we do the Ceramic coat on vehicle, then itsgood at-least for 1 year. It remain hydrophobic and also resist dust also.

But if after 1 week or 1 month of Ceramic coat,if we want to remove it, then what can be the appropriate procedure to removethe Ceramic coat?

@bym007

Machine polishing would get rid of any coating usually.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[bym007]

clear coat would be safe. right

Depends on your technique. If you take precautions, you should be good.

If the car had negligible clear coat to begin with, you shouldn't be touching or messing with it in first place....

[ifadey]

This video is packed with information about complete range of Soft99
paste waxes. Soft99 has huge range of waxes and it's understandable to
get confused on the first glance. This video will help you understand
why each wax is made and it will help you decide which one is best for
you.

[saad310799]

Want more these types of videos on other brands.
Keep up the good work!

[tintin1]

This post was flagged by the community and is temporarily hidden.

[saad310799]

Talking about car or yourself​🤣🤣🤣.

Sir products will be more better and instead of closet arsenal will be be better.