Car Care and Detailing Dreams

[margallar]

^ no u shud go to vague_one and let him do his magic

[anzaidi]

^ no u shud go to vague_one and let him do his magic

Will do that soon may b next month InshAllah

[Skill]

@ thekonsultant: - Bare dodo shodo chal rahe han ag kal .. MashAllah Kahif bhai bohat allaaaa

@ Skill:- Amir bhai it was v nice meeting with u too , inshAllah will meet u again . Yes Amir bhai the paint was done by the suzuki guys , Experts like u can easily judge the difference but person like me dosent feel much difference

zaidi,
flaws are left under the paint,i mean at base,i have seen a patch on the ride of kashif bhai as well,even i did not see his car in detail but guzarte guzarte jaisai ahmed bhai garriyoun ki skin haath laga laga k chek kertai hain:P main nai guzarte hue aik spot inki ride pe dekh k poocha tha :-! he said this piece is touched so its not a big game to judge a paint is redone or not,once you get into this field.
so bhai jaan jo flaws paint laganai se pehlai body ki surface pe inhoun nai uneven primer main chorrai hai wo ooper bhe nazar atai hain.
only soluntion change the hood with new one. or a PAAPEE type painter who would re do.

[Skill]

@ thekonsultant: - Bare dodo shodo chal rahe han ag kal .. MashAllah Kahif bhai bohat allaaaa

@ Skill:- Amir bhai it was v nice meeting with u too , inshAllah will meet u again . Yes Amir bhai the paint was done by the suzuki guys , Experts like u can easily judge the difference but person like me dosent feel much difference

did not have the time yesterday,i will come after a couple of week again and will tell you the judgments are quite obvious

[v8]

There were some scratches on my ride since I purchased.
Just tried today to get rid of them. Deep scratches are still there but rest all are gone

Product & Equipment

Done by hand, not with machine.

Process: Apply limited quantity of liquid on desired area, use microfibre cloth in circular motion and then in reverse direction untill the liquid is dried and vanished. Apply again if required. Wipe with clean cloth. Apply thin layer of wax.
Cautions:
Not to use excessive quantity of product as it disolves the color.
Product should be avoided to interact with skin as contains injurious chemicals.

Scratch-1 on rear bumper:

Before:

After:

Scratch-2 on rear bumper:

Before:

After:

Scracth-3:

Before:

After:

Will work again on left-over areas & imperfections on next weekend, insha'Allah.

[thekonsultant]

JazakAllah @anzaidi - @skill

[awais.9]

@ experts

can i try this scratch remover on my ride?
because when i washed it those became apparent,b4 they were hidden in dust

[Skill]

@ experts

can i try this scratch remover on my ride?
because when i washed it those became apparent,b4 they were hidden in dust

you can use scratch removers on your car because these are made for use on cars:) but remember with improper technique you might be able to fill the scratches but eventually would remove excessive layers around the scratch.
Let some senior member in your vicinity do it in front of you first,FAQ is your right,that is why gtgs are essential.

[RedBull_ar]

complete range of mothers products available at PSO F8
(pure polish, polish, carnuba wax, detailer, tyre cleaners, interior cleaners etc)

priced around 1200rs for polish and wax

[Skill]

i am thinking that after the launch of dcs website,this thread is going towards downfall,i am an anxious learner here,learned many a things on this thread,i dont want to own this thread.
I request usman,khurram,mistero,accord7362,thekonsultant,ahmedyar,kse101,devilaprentus,imranhakoro and other regular members to be a part of pakwheels as well which is just like a mother site.
I have many questions in my mind about my own vehicle to discuss with you people but alas!
I am sorry to say this thread is so passively taken care of now by the poster and fellows.
I also want this thread, not to become a show piece for every car owner,there should be posts on flaws of your rides too,why the members do not share the flwas and their reasons so we could learn some thing better,praising each others rides and reflection is good but excess of every thing is bad so lets start sharing the flaws on our rides so we could at least reach to the reasons and their remedies.
Where are the regulars members:-!

[xzap042]

i am thinking that after the launch of dcs website,this thread is going towards downfall,i am an anxious learner here,learned many a things on this thread,i dont want to own this thread.
I request usman,khurram,mistero,accord7362,thekonsultant,ahmedyar,kse101,devilaprentus,imranhakoro and other regular members to be a part of pakwheels as well which is just like a mother site.
I have many questions in my mind about my own vehicle to discuss with you people but alas!
I am sorry to say this thread is so passively taken care of now by the poster and fellows.
I also want this thread, not to become a show piece for every car owner,there should be posts on flaws of your rides too,why the members do not share the flwas and their reasons so we could learn some thing better,praising each others rides and reflection is good but excess of every thing is bad so lets start sharing the flaws on our rides so we could at least reach to the reasons and their remedies.
Where are the regulars members:-!

i was thinking the exact same thing. seems line the thread is dying.. where are our experts...

[xzap042]

and my previous questions are still unanswered.

[thekonsultant]

@skill

I am always here and reading the thread on daily basis. The thread is a bit slow but it had nothing to do with launch of DC website. Being a part of DC, we had been very busy lately, getting cars ready for the show was a big time job and then to maintain them at the show was a killing effort. Buffing the cars with detailer spray after every 15 mins - so u can imaging.

After the show, most of us was extremely exhausted and still most of us manage to post here.

This thread wont go down at all, experts are reviewing it regularly and giving their inputs.

[Skill]

@skill

I am always here and reading the thread on daily basis. The thread is a bit slow but it had nothing to do with launch of DC website. Being a part of DC, we had been very busy lately, getting cars ready for the show was a big time job and then to maintain them at the show was a killing effort. Buffing the cars with detailer spray after every 15 mins - so u can imaging.

After the show, most of us was extremely exhausted and still most of us manage to post here.

This thread wont go down at all, experts are reviewing it regularly and giving their inputs.

Kashif bhai ,
i do not accept your justification(with respect),i am seeing the posts at dc site, their timings and presence as well as i have seen many of us online at pw at the same time but avoiding the thread,do not know why?

I am going with the Jaggi's opinion this time,the THANKS button should be omitted now.

[Skill]

and my previous questions are still unanswered.

i am sorry,my expertise are limited on hyper polymer glaze,thats why i was silent on this topic,i just have seen it with usman and it is some thing oily,i did not like the result (sorry usman).

[accord7362]

i am thinking that after the launch of dcs website,this thread is going towards downfall,i am an anxious learner here,learned many a things on this thread,i dont want to own this thread.
I request usman,khurram,mistero,accord7362,thekonsultant,ahmedyar,kse101,devilaprentus,imranhakoro and other regular members to be a part of pakwheels as well which is just like a mother site.
I have many questions in my mind about my own vehicle to discuss with you people but alas!
I am sorry to say this thread is so passively taken care of now by the poster and fellows.
I also want this thread, not to become a show piece for every car owner,there should be posts on flaws of your rides too,why the members do not share the flwas and their reasons so we could learn some thing better,praising each others rides and reflection is good but excess of every thing is bad so lets start sharing the flaws on our rides so we could at least reach to the reasons and their remedies.
Where are the regulars members:-!

Na Aamir Bahi its not like that my posting frequency is same , I used like button to show my presence , bit busy while on job, the main thing is bonding & always ready to help each other even some time out of this thread.

I am always on PW & at your service

[anzaidi]

@ experts

can i try this scratch remover on my ride?
because when i washed it those became apparent,b4 they were hidden in dust

Awais remeber what rizwan bhai said " after wash and waxing the swirls and the scratched will be more visible but dont worry about them keep waxing .. As far as using scratch remover yes u can use them but as Skill said " with improper technique you might be able to fill the scratches but eventually would remove excessive layers around the scratch " ..

[Mistero]

@chaudhary...told you before...will tell you again...refrain from doing anything else with your car...just stick to the basics...get those right first. Learn how to stop putting in new swirls n scratches before you move on to removing them.

@skill....u r so lucky im on my ipad right now n cannot write a long lectured post...who was it Who guided chaudhry just a few days ago with long write ups? Kashif posted casper after his detail here...ahmed was posting from hong kong...what else do u want...you cannot put a gun to someones head to post...the thread was to help out people with detailing...and that is what it has finally come back to...because when it had picked up speed it was because it had become a lounge and casual chat room...

Usman is busy detailing, he has many roles to fullfill....give him a break...kashif already posted only when he detailed...i was into feedbacks on my car and advising others...i still did that...u say u r going through the dc site...then u must know that there is no party going on there...n if u read my status....it says no detailing for straight two weeks...so what do i post on?

Ahmed was in hk, aamir is in angola...the rest were already posting occassionally...

Why take it out on the dc site?

[vague_one]

i am sorry,my expertise are limited on hyper polymer glaze,thats why i was silent on this topic,i just have seen it with usman and it is some thing oily,i did not like the result (sorry usman).

Brother, no need to be sorry to me! Im no one to pass judgements...Ive always said that the opinions given by me are just what I am able to pull out with the prod! Yours my differ to great extent! Now this is a glaze, an the reason I`m using this glaze is to mask swirls....you might have remember me writing the reason we see swirls is the edges reflect light...this specific glaze being extremely oily fills up the hollow space an thus the swirl is visible no more!

[anzaidi]

and my previous questions are still unanswered.

nabeel regarding the Polymer glaze , i did used it but made some mistakes using it , further u can read the following post (if i would have read those posts earlier i might not make the mistakes i made using the glaze )

Post # 5263
Post # 5265
Post # 5272 .. i hope these might help u, in case not , than let some senior answer this