DIY: underbody lighting kit and eyebrows DIY

Tags: #<Tag:0x00000009336360>

Sharo53 (Sharo53) 2011-03-26 09:07:54 +0500 #1

Final outcome at page 2
gather all the things from hallroad

6 pcb boards 6*20=120 RS
200 green 5mm super bright leds 200*1.50=300 RS
220 resistors 1000 ohms .5 watt 1 pack =50 RS
soldering wire =70 RS
2 hot glue sticks 2*10=20 RS
double tape 14 feet 5*14=70 RS
found some wires laying in store bt still spend =50 RS
white silicon still left
also gathered some mufta products
now the talking pictures

i make 6 strips of 1 board

my desi way

and finally

now the work begins

"zarorat ejaad ki maa ha"lolx got me a helping hand my plaas and nose plass

after adding resistors

joining strips together...

now i was thinking the final product is completed

but after measuring again i came to know that i had to stripdown the left and right side strips coz of the piller/guarders on the floor of charade

here comes the mufta product the wireing duct

and finally the final product ready to be installed...

installed just one side,was curious to see how will it looks like, and it looked great..

now a big big THANKS to sir madhouse12 i used his idea
and thanks to pakwheels.com too

raja_shahbaz (raja_shahbaz) 2011-03-26 11:32:34 +0500 #2

awesome job done sir thanks for sharing waiting for more!!!

osama96 (osama96) 2011-03-26 11:43:33 +0500 #3

nice DIY yar post some more pics.

CutePoison (CutePoison) 2011-03-26 11:56:18 +0500 #4

GOOD!!!!
Im seriously thinking of doing that now,
How are you combininng all these? Can you explain the PCB circuit more
and the wires are connected to the battery directly for power?

Sharo53 (Sharo53) 2011-03-26 16:44:09 +0500 #5

thanks to you sir..

smartdevil_striker (smartdevil_striker) 2011-03-26 16:46:50 +0500 #6

WeLL Don3!!

Sharo53 (Sharo53) 2011-03-26 16:47:09 +0500 #7

INSHALLAH tomorrow at this time
i dont know how bt my flasher relay died so for the time being these are simple lites

Sharo53 (Sharo53) 2011-03-26 16:51:31 +0500 #8

all the led are connected in parallel way so if any one or two get damaged rest will have noo effect
i'll try to make i pictorial display
the defroster got damaged of my car so i used that switch as a on/off for leds

Sharo53 (Sharo53) 2011-03-26 16:53:38 +0500 #9

thankx

fawi (fawi) 2011-03-26 16:54:07 +0500 #10

very impressive,,, since u did everything by urself.. MASHALLAH...!

Sharo53 (Sharo53) 2011-03-26 17:02:58 +0500 #11

yes sir each n every thing done by me alone it took me about 15 days or the completion i was working slow..

CutePoison (CutePoison) 2011-03-26 17:11:07 +0500 #12

Wont it be damaged by water?

Sharo53 (Sharo53) 2011-03-26 17:19:32 +0500 #13

na sir thats why i didnt connected them with parking lites and used seperate switch when ever i'll get my car washed i will not turn them on for a day or two and it will be all good then

shaddy (shaddy) 2011-03-26 17:24:37 +0500 #14

Fair and handsome

ersal (ersal) 2011-03-26 17:31:44 +0500 #15

liked ur desi ways sounds funny but helpful in one man DIYs..

Sharo53 (Sharo53) 2011-03-26 17:41:16 +0500 #16

sir g drawer k ander deekhna mana ha

yup without them its a real tough job

spitfire (spitfire) 2011-03-26 18:06:25 +0500 #17

very nicely done....

Sharo53 (Sharo53) 2011-03-26 18:14:13 +0500 #18

@spitfire
thanks alot sir

freakykiller (Bilal Ahmed) 2011-03-26 18:36:52 +0500 #19

awesome job..those LEDs look great

OwaisYunus1 (Owais_Yunus) 2011-03-26 18:40:25 +0500 #20

To protect them from water, fill the ducts with clear silicone (around leds and the resistors and all) That way it'll last alot longer.