Engine Oil for Old Cars

[afnan.bashir]

NISSAN Is Daily Driver Actually ....This One Is Purely My Project Work You See In D.P

Restoring 86? any thread or pics?

[SER_GTR]

Restoring 86? any thread or pics?

Check My Threads.....Its There Its Named As ' Project 86'

[nfssaad]

zic is launching a new oil zic M... its rated API SJ for conventional vehicles.. saw the advert in a magazine..

also Paksuzuki and zic signed an agreement to use zic differential oil in suzuki vehicles..

zic setting up blending plant in pakistan... jo quality bachi thi ab to woh bhi gai...

[Xulfiqar]

Here Filter House had all these tools and i was surprised to see these various size tools as to my knowledge people used wranch with wire

The funny bit is when you see the mechanics fighting with a hot cuore filter with all sorts of craziness, One can remove the number plate and reach in to remove the filter easily.

[afnan.bashir]

The funny bit is when you see the mechanics fighting with a hot cuore filter with all sorts of craziness, One can remove the number plate and reach in to remove the filter easily.

Well I remember my friends coure had de shaped bumper and what he told me was thing you wont believe. He said Its company design flaw you need to remove bumper to remove oil filter

[Xulfiqar]

There is a panel behind the number plate that is sometimes not removed from the mold. You can cut it to make an access hole. The old suzuki 660 taxi also had this issue.

[afnan.bashir]

@Xulfiqar i am stuck with a problem that my car has fuel smell. Increases on jumps and turns. Canister had already been removed by someone could it be two way valve on gas tank? if yes where should i wire so that tank gets ventilated and petrol does not leak.

[Xulfiqar]

check the filler neck for corrossion.

[afnan.bashir]

check the filler neck for corrossion.

ok i will check it. Searched the internet and those who have removed canister and purge system face such problem because of vent pipe has issues. if they block tank gets either vapour lock or pressurized.

Is to hard to wire up a canister? I think following is the culprit. Ill check in the morning for more detail how following part is wired up.

[afnan.bashir]

@xulfiqar how can one inspect filler neck i guess its very difficult to get to?

[billa88]

salam xulfiqar bhai i hv corolla x 2006 jdm recently ring job done and odo reading is 130k now plz sugest me a good engine oil and filter.

[billa88]

after ring job done i drove car 1k and oil used is 20w50 petromin....mechanic na dal diya tha he said bs 1k k bad drain kar dana..

[billa88]

Xulfiqar
plz ur suggestion is required.salam xulfiqar bhai i hv corolla x 2006 jdm recently ring job done and odo reading is 130k now plz sugest me a good engine oil and filter.after ring job done i drove car 1k and oil used is 20w50 petromin....mechanic na dal diya tha he said bs 1k k bad drain kar dana..

[Xulfiqar]

Why did you need a ring job at such low mileage?

your mechanic is right in telling you to change the oil out at 1000 kms - it will remove any excess wear metals from the engine. Use a good 5w30 in it for fuel efficiency.

[bradpit]

what does one liter costs?

Sir it costs Rs. 1,350/L.

The good part is it works for 3 years even at above 50C temperature of Nawabshah where my family lives.

[Xulfiqar]

@Xulfiqar how can one inspect filler neck i guess its very difficult to get to?

the fill neck is in the rear left wheel well.

Check it for corrossion. Do also tell what sort of cap are you using, This accord came with a metal cap that had the words "GAS" written on it. It has a little pressure regulator in it. It was installed on export and JDM models, the American cap was different.

[afnan.bashir]

the fill neck is in the rear left wheel well.

Check it for corrossion. Do also tell what sort of cap are you using, This accord came with a metal cap that had the words "GAS" written on it. It has a little pressure regulator in it. It was installed on export and JDM models, the American cap was different.

Today Ill set on ramp and inspect...... Well don't laugh but i have plastic cap with DIESEL Written on it did orignal cap had breather in it?

[Xulfiqar]

the original cap was unique - it had a regulator of some sort in it.

[afnan.bashir]

the original cap was unique - it had a regulator of some sort in it.

Well inspected the filler neck in detail...... There was alot of dirt on it and it was hard dirt but didnot feelt rusty and all dirt was dry........ so i guess we can rule out Filler Neck to be the culprit. Next thing i think is ammmmmmm two way valve and its wiring

[billa88]

i am new in this field bhai.due to whitish smoke at high rpms and too much knocking and engine oil level down thats y ring job done xulifiqar bhai..i purchased this rolla in amnesty scheme after 3,4 month this problem occur thats y i did..
bhai plz suggest me good oil and m use this car for going out of city only...no daily use....and also tell me ATF oil for this whther i changed transmission oil or continue with this it has original factory transmission oil not changed...and not issue with this (Mashallah) uptill now smooth tranny...