Failed DIY :( help!

[punk1]

if u live near ph6, visit me ill complete ur DIY

i got the tools for the job.

[Durrani90]

the answer to this is so simple, take the back window out and u'll have no problems

[dms664]

if u live near ph6, visit me ill complete ur DIY

i got the tools for the job.

ph 6 hayatabad?

[dms664]

the answer to this is so simple, take the back window out and u'll have no problems

aye shawashay

[mwm749]

Pl update........

[razaksyed]

I have sucessfully used the Double Nut Technique (as suggested by Xulfiqar) on several occassions - while confronted with similar situations ( I meddle around with classic bikes therefore am acquainted with this). A shade-tree mechanic would simply call it "chuck nut" That said, you would need proper tools to access and undo the screw from top - else, you will end up scratching the screen or parcel shelf

[dr3vil]

go to karkhano buy a multi screw driver which as built in many screw drivers it also bends at any angle

[dms664]

sitll pending

this eid will try again to take on this diy again

[car_bus2008]

hahahaha till today it is pending.

[syncview]

I remember doing this back in 2009 or 10 I guess, I got lucky with a small ratchet screwdriver.
However, there was another thread in which some senior members suggested to use a check nut, I have been successful with that too just have be handy with spanners

[civic01]

\

take a plier and rotate the screw from the pointed side ..... it will work ...just have a try

[HellsGuardian]

\

take a plier and rotate the screw from the pointed side ..... it will work ...just have a try

i suggest not to, it can damage the threads and the screw might get stuck and will have to cut it to get it out. Use proper tools as suggested earlier

[civic01]

i suggest not to, it can damage the threads and the screw might get stuck and will have to cut it to get it out. Use proper tools as suggested earlier

yup u r right

[madhouse12]

get two nuts of the appropriate size and wound them on the thread from below. tighten one against the other and then u can rotate the bolt from below. or get a small screw driver or ratchet set for it

[MarX]

@ op

Sir if you are in Islamabad

i will do it for you free.

I have every tool available in SNAPON's inventory

[hamza_xeg]

why have they placed screws at such awkward place

[OwaisYunus1]

@marx. Your Snap-On tool trolley is making me drool

[MarX]

Thankx Sir

I have Beta trolley as well along with Bosh electric tools (H)

from the past 5 years i never let any mechanic touch my car

Happy endings every time

[nfssaad]

Thankx Sir

I have Beta trolley as well along with Bosh electric tools (H)

from the past 5 years i never let any mechanic touch my car

Happy endings every time

place of purchase of such tools?

[MarX]

Place of Purchase is USA
Mode of transportation= Aircrafts
Customs Duty = ZERO (Coz they are my personal tools and a Licensed Engineer of Boeing 777 is allowed to have a tool box )
as a personal baggage.