Here comes the "BEAST"....!

[DrShaggy]

Ok,
Checked my setup from Nauman bhai,
And we are left with some serious problem...
The problem found in my HU RCA connectors....
There grounds blew....Nauman bhai suggested me the best way is to repair the grounds....but i did not want to open my pre,as it is new..

What can i do...?I am really disappointed from its sound...like WEEEEEEEEEEE,:-# on RPM...

Pico fuse repair is quite easy and cheap actually. Get it fixed and in the future avoid hot swapping the RCAs (taking out and plugging in the RCAs while the headunit and the amplifier are on).

[XaxoOBoY]

YAAR JZ .. they are Insulting our SoundMagus! Btw i Own the SoundMagus Amp of harismehmood and really Satisfied with it. but it has NO MATCH with this JBL monster.

Lakin seedhi baat hai.. $$ ki game hai. Agar mere pas bhi $$ hota tau aaj JBL, Type R Aur Fusion Hota

[haarismahmood]

YAAR JZ .. they are Insulting our SoundMagus! Btw i Own the SoundMagus Amp of harismehmood and really Satisfied with it. but it has NO MATCH with this JBL monster.

Lakin seedhi baat hai.. $$ ki game hai. Agar mere pas bhi $$ hota tau aaj JBL, Type R Aur Fusion Hota

How is Magus working???? Have you done electrical upgrades like Big3, etc???

What are you powering it with and at what ohm load???

[XaxoOBoY]

How is Magus working???? Have you done electrical upgrades like Big3, etc???

What are you powering it with and at what ohm load???

OOH YEAH! After alot of WAR with myself and eating JZ's And HAMZA's HEAD. I figured it out. CHECK out your PM For the Video. And I'm happy With the AMP. Seriously it fills All my needs. I'm Running VMAX 12.4 600RMS on 4OHM previously but now on 2OHM. It is giving be goosbumps! Check out the video and do the Justice.

Upgrades Include's

1) Volt Stabilizer + Full Ground Wiring With 4 Gauge Wire
2) Fusion Wiring For Woofer.
3) Factory Specs Box For VMAX 12.4

[haarismahmood]

OOH YEAH! After alot of WAR with myself and eating JZ's And HAMZA's HEAD. I figured it out. CHECK out your PM For the Video. And I'm happy With the AMP. Seriously it fills All my needs. I'm Running VMAX 12.4 600RMS on 4OHM previously but now on 2OHM. It is giving be goosbumps! Check out the video and do the Justice.

Upgrades Include's

1) Volt Stabilizer + Full Ground Wiring With 4 Gauge Wire
2) Fusion Wiring For Woofer.
3) Factory Specs Box For VMAX 12.4

LOL, previously you had connected your woofer at 8 ohms not 4 ohms

AND PM not received yet

[stj174]

Ok,
Checked my setup from Nauman bhai,
And we are left with some serious problem...
The problem found in my HU RCA connectors....
There grounds blew....Nauman bhai suggested me the best way is to repair the grounds....but i did not want to open my pre,as it is new..

What can i do...?I am really disappointed from its sound...like WEEEEEEEEEEE,:-# on RPM...

yup when we met for the configuration of the JBL amp, i noticed a few things including rca grounding, and asked talha to check the RCAs . We opened the pre and we came to know that the grounds were blown.

I think after getting them repaired the OP will notice a huge difference in performance of the overall setup including bass too

[stj174]

ask nouman bahi for the desi way....
like connecting a small piece of wire from RCA 's outer side to the body of pre or to the chassis of car....
do it if nouman bahi permits..

jee Sharo bhai the desi tareeka, if done properly works fine too

but with the passage of time the wire wound around the connector becomes loose and with the passage of time sulphate builds up on the copper wiring, which in turn deteriorates the quality of connection

The desi walla tareeka works very fine if done properly, although i am in the favor of getting it done from inside the head unit

But thats just me

[kzaki]

lovely amp this is truly a monster ....

[mehamgul101]

well i am also inspired from its performance

[mehamgul101]

well i must give you congrats on your this purchase

[rizi_85]

jee Sharo bhai the desi tareeka, if done properly works fine too

but with the passage of time the wire wound around the connector becomes loose and with the passage of time sulphate builds up on the copper wiring, which in turn deteriorates the quality of connection

The desi walla tareeka works very fine if done properly, although i am in the favor of getting it done from inside the head unit

But thats just me

I also second Nauman Bhai. I faced the same problem with my pre. Initially I checked by ground externally but later on it was fixed from inside.

But you should be careful while fixing it from inside or let some expert do this (expert in soldering on PCBs). For an expert its hardly 2 minutes job.

Also you will not find the fuse of required rating easily. In this case you can remove the fuse and jump the two points. Since its a ground it will not cause any harm and also it is similar to external ground. The noise will eliminate if done from inside. Its tried and tested

[Talhadon]

lovely amp this is truly a monster ....

@Kzaki Sir,
Thanks...Ap ne bhi to monster hi liya hai SQ mein...:PMakdi wala...

[Talhadon]

well i am also inspired from its performance

Inspiration is guaranteed...:P(H)

[Talhadon]

well i must give you congrats on your this purchase

Thanks buddy...

[Talhadon]

jee Sharo bhai the desi tareeka, if done properly works fine too

but with the passage of time the wire wound around the connector becomes loose and with the passage of time sulphate builds up on the copper wiring, which in turn deteriorates the quality of connection

The desi walla tareeka works very fine if done properly, although i am in the favor of getting it done from inside the head unit

But thats just me

Agreed Sir,
But desi tareeka roxxx :P.....2 x subs are now performing damn good....

[Talhadon]

OOH YEAH! After alot of WAR with myself and eating JZ's And HAMZA's HEAD. I figured it out. CHECK out your PM For the Video. And I'm happy With the AMP. Seriously it fills All my needs. I'm Running VMAX 12.4 600RMS on 4OHM previously but now on 2OHM. It is giving be goosbumps! Check out the video and do the Justice.

Upgrades Include's

1) Volt Stabilizer + Full Ground Wiring With 4 Gauge Wire
2) Fusion Wiring For Woofer.
3) Factory Specs Box For VMAX 12.4

Which gauge wire you are using with magus amp for powering and grounding....:?
Pm me your sub and magus banging video aswell...

[Talhadon]

I think after getting them repaired the OP will notice a huge difference in performance of the overall setup including bass too

:eek::eek::eek:
JBL now blowing my ears...

[haarismahmood]

:eek::eek::eek:
JBL now blowing my ears...

Boy we are meeting tomorrow for auditioning......

[Talhadon]

YAAR JZ .. they are Insulting our SoundMagus! Btw i Own the SoundMagus Amp of harismehmood and really Satisfied with it. but it has NO MATCH with this JBL monster.

Lakin seedhi baat hai.. $$ ki game hai. Agar mere pas bhi $$ hota tau aaj JBL, Type R Aur Fusion Hota

Brother we are not insulting Sound Magus amp....
It is truly a lil beast amplifier,If feed with proper 4 awg wiring with cap and big 3...

We are just comparing it with our JBL amps,and in result we come to know that it can ate magus in terms of power,quality,thd etc...(H)

[Talhadon]

Boy we are meeting tomorrow for auditioning......

Sorry Haaris bhai....I lost internet connection thats why not able to keep u in touch....!
You are always welcome for auditioning in fact,buying this amp is also behind a big inspiration from your JBL...(H)