Kawasaki GTO 125, Time to Time Small Repairs/Cleaning

[basic]

"Bhai yeh to aap ke muhabbat hay".

Thanks, God bless you.

Nadeem Bhai some neat file work, you sure have steady hands!

[basic]

Most of the pictures are taken with mobile phone camera.

These are taken with nokia x-6 mobile, (5M pixel camera).

sab chorein aur ye bataein k camera konsa hai jis se wo clutch lever ki pics li hain ??

[basic]

Front foot rest covering.

[sualehsmarty]

Ok sir thank you

[basic]

Bad attempt for white lettering.

[basic]

And some not so bad attempt.

[Vettelover]

Assalamualaikum!

I hope this isn't the wrong place to ask, but I recently bought a GTO 125.
The problem I'm facing is that if I go wide open throttle one time, the bike accelerates amazingly. If I try again immediately, the bike hesitates and doesn't accelerate well. If I wait for a minute or two and try again, it accelerates once and then the same problem.

What could it be? Do you have any idea?

Thanks a lot in advance!
Abdullah.

[faiz.aslam.121]

Tipp-ex?
I might have an idea- We used to have an engraving pen, so if you can get hold of one, just form the letters and symbols by digging into the plastic, then filling it with whatever you used above^
Or, you can also use a soldering pen, that's if your hands are steady enough

[aximaxim]

And some not so bad attempt.

It really is not that easy. Looks simple but very fiddly stuff.

Its an honest thread....... OP shares his highs and lows of DIY life. I love it!

[MMYT]

And some not so bad attempt.

Nadeem Bhai it really is an excellent attempt (how difficult it is, i know from my own attempts) what i did was fill in the white, let it dry out really properly, take out excessive paint with 1500 grit paper wrapped really tight over small block, give multiple shots of clear coat and it did worked for me.
Regards.

[yasirsa]

Assalamualaikum!

I hope this isn't the wrong place to ask, but I recently bought a GTO 125.
The problem I'm facing is that if I go wide open throttle one time, the bike accelerates amazingly. If I try again immediately, the bike hesitates and doesn't accelerate well. If I wait for a minute or two and try again, it accelerates once and then the same problem.

What could it be? Do you have any idea?

Thanks a lot in advance!
Abdullah.

You are running on rich fuel

Sent from my LT26i using PW Forums mobile app

[basic]

Dear pak wheeler, I don't have any idea.

Please take your bike to a proper 2 stroke workshop, hopefully your problem will be resolved.

Actually I haven't faced this type of problem, and I am also not in this profession, so don't have multiple type of experiences.

Assalamualaikum!

I hope this isn't the wrong place to ask, but I recently bought a GTO 125.
The problem I'm facing is that if I go wide open throttle one time, the bike accelerates amazingly. If I try again immediately, the bike hesitates and doesn't accelerate well. If I wait for a minute or two and try again, it accelerates once and then the same problem.

What could it be? Do you have any idea?

Thanks a lot in advance!
Abdullah.

[basic]

Many thanks for your suggestion.

It is already engraved, just filled it with proper paint.

Job done, cheers....

Tipp-ex?
I might have an idea- We used to have an engraving pen, so if you can get hold of one, just form the letters and symbols by digging into the plastic, then filling it with whatever you used above^
Or, you can also use a soldering pen, that's if your hands are steady enough

[basic]

Thanks brother Tahir.,

You did that in a professional manner.

Don't have a plan for clear coat so,

Filled with paint,

After drying warped cloth tightly around finger,

Cloth soaked in Xylene, and cleaned the excessive paint.

Thats all.

By the way waiting for your next project

Nadeem Bhai it really is an excellent attempt (how difficult it is, i know from my own attempts) what i did was fill in the white, let it dry out really properly, take out excessive paint with 1500 grit paper wrapped really tight over small block, give multiple shots of clear coat and it did worked for me.
Regards.

[basic]

Thanks so much sir gee,

before doing I was not sure what would be the result, but thank God it worked.

BOL

It really is not that easy. Looks simple but very fiddly stuff.

Its an honest thread....... OP shares his highs and lows of DIY life. I love it!

[basic]

Preparation for oil level window repair.

Cleaning, hand grinding small bumps erupted during dis mantling.

[basic]

Original window is made with flexible material.(Nylon or something from polymer line)

Buffed it, but no good results.

[aximaxim]

Epoxy coating on galvanized parts.

This type of coating is my first experience.

Nadeem Sb, what is this epoxy coating you are using?

I mean the epoxy coating I know about is not clear like the one you are using here.

[basic]

Its my first experiment,

few drops of both epoxy tubes in 10 ml of xylene.(R B lite 24 hour cure, transparent)

Coating on desired surface by dipping or using brush.

wait for cure, job done.

at the moment I don't know what would be the result after using the bike on road.

Nadeem Sb, what is this epoxy coating you are using?

I mean the epoxy coating I know about it not clear like the one you are using here.

[basic]

Hand grinding lens holder for a smooth seat fitting.

A round glass bought from a wrist watch repair shop for Rs. 20,

Parts to be assembled.