Khyber 91 Reincarnation

[Deadly_Flame]

Hello People,

I'm finally getting my khyber fixed

Though i forgot to take pictures before the work started. I will need tips as to what can go wrong where should I focus etc.

Help me get the best work done as I am not familiar with good/bad denting in a professional way.

Pics on Page 3

G15A discussion on Page 4

Dirty Laundry Page 5

Price List:

1. Rear Golays (Pair) ------------------------------------ Rs 800/-
2. Bonnet (Taiwanese) ---------------------------------- Rs 5700/-
3. Left fender shield metallic (Taiwanese) ---------------- Rs 3200/-
4. Rear Bumper (Taiwanese) ----------------------------- Rs 1650/-
5. Door Pins (All doors) ---------------------------------- Rs 1000/-
6. Denting ---------------------------------------------- Rs 18000/-
7. Paint Job --------------------------------------------- Rs 25000/-
8. Namda ----------------------------------------------- Rs 3000/-
9. Electrician labor -------------------------------------- Rs 4000/-
10. Mechanic labor (engine nikalna or lagana) ------------- Rs 2500/-
    11.Engine Wash ----------------------------------------- Rs 1000/-
11. Foot Boards ----------------------------------------- Rs 2000/-
12. Miscellaneous (Denter's end) ------------------------- Rs 3200/-
13. Miscellaneous (few small things from waseem autos) --- Rs 4375/-

Grand Total = Rs 75425/-

[Deadly_Flame]

So the car is pretty much similar to this I don't have any other picture unfortunately but this shall do i hope.

[Deadly_Flame]

This is the front view the only one i could find (blush)

Here is the another pic that shows the repaired side of this accident.

[aqibasit]

First tell that how much r u willing to spend.

U can give it a complete paint job with a good color..Suspension rebuilt..Engine overhaul or swap a powerful motor in it..Complete interior rebuilt.. Coilovers.. low profile with 15s..etc etc etc. it all depends how much u wanna spend

[Deadly_Flame]

Well this is low budget project. My budget is 60k well that's what my dad is parting with. I personally have 20k that i might spend on the suspension, it all depends what i get out of the 60k first. So I've a total of 80k to spend and want to get the maximum out of it.

[Deadly_Flame]

This is the condition my car is in currently.

Interior: If you look below the steering and the left side you'll see that the floor is in dire condition (only the front part of the floor).

This the left and right side under the bonnet:

Behind the Left front tire: the pic is at a bad angle hope you guys get it.

The joint between the left front door and the mudguard:

And some other areas i am sure you can make them out

P.S: Sorry for the unrotated pics in my pc they are alright don't know why pakwheels is attaching them this way.

[Deadly_Flame]

Well the work started yesterday the denter has done 2 doors and a part on the right back side of the car. I am attaching front view and side views of the doors do comment about how good or bad the denting is.

Right Front Door:

[aqibasit]

First get total body and paint work done. then go for suspension rebuilt..
Will u change the color or just keep it white?

[Deadly_Flame]

That's the plan total body denting afterwards paint. If after that I've money left will spend it on suspension. Well I like khyber's original white so i plan to go for it.

[Xulfiqar]

that is some serious structural damage by the strut towers - is your car missing the plastic fender shields?

[Deadly_Flame]

Plastic Fender shield is the plastic shield above the wheel?

[Xulfiqar]

yes thats the one

[Deadly_Flame]

A little more of the damaged parts

[Deadly_Flame]

yes thats the one

Well there wasn't any on the left side and the one on the right side wasn't in a good shape either. Are they that important ??

[Deadly_Flame]

Back side ka yeh kaam hua hai or aaj back door b ander fit kia hua tha

Yeh left side hai iss ka i think pehlay koi piece laga hua tha and abi pura kaam b nai kia iss side ka

Backside ka kaam b start hai

And finally back wheels k ooper ander wali side k liyae "golay" lay liyae hein they were Rs 350/- each.

[star2]

that's good..try to replace as many pieces of metal as you can....

[Xulfiqar]

Well there wasn't any on the left side and the one on the right side wasn't in a good shape either. Are they that important ??

They are very important - they keep dirt/scum etc out of crevices inside the fender wells. While this is in action, look up my post on vintage car club to make some home-made body cavity wax treatment. as the car is stripped down it will be easier to apply it and by the time its done, the stench will be gone.

Are the little air vents that go behind the bumpers intact or are they missing?

[Deadly_Flame]

that's good..try to replace as many pieces of metal as you can....

Yeah will make sure whatever's fu**ed up gets fixed

Are the little air vents that go behind the bumpers intact or are they missing?

Not really sure what you mean by the vents behind the bumper.....

Are these vents on the bumper or the body of the car?

[Xulfiqar]

the vents are in the body, behind the rear bumper on the sides of the car, you have square cut outs in the body - the vents are placed into those holes, they are there to control air movement in the cabin. If they are missing you will get water, dust and road noise in the car.

[Deadly_Flame]

Well i believe there weren't any or if there were they weren't in a working condition. I'll verify today the situation on those vents.