Liana owners & fan club

[saboor73]

It is considered the best coolant locally made with good chemicals. Also, ethylene glycol based. What drawbacks you can think of it?

I have seen PW member rating it as bad as Osaka I have never tried this coolant so just testing it will be a good idea

[Fahad.Ayub]

It is considered the best coolant locally made with good chemicals. Also, ethylene glycol based. What drawbacks you can think of it?

The last time I checked NASA coolant wasn't locally made
It was imported from Korea in bulk and repacked in smaller bottles in Karachi

[abid110]

The last time I checked NASA coolant wasn't locally made
It was imported from Korea in bulk and repacked in smaller bottles in Karachi

Yup. This is what i was told too. But since it is ethylene glycol based, it should work good

[abid110]

I have seen PW member rating it as bad as Osaka I have never tried this coolant so just testing it will be a good idea

Btw, there are huge chances that people get hold of fake products which must not be working. Otherwise osaka and nasa are both well known.we all use nasa carb cleaners so widely

[cracked]

https://www.pakwheels.com/forums/mechanical-electrical/212877-ask-xulfiqar-automotive-encyclopedia-257#post4921863

i sprayed wd40 yesterday but to no avail. im going to pour one tea spoon of ATF in it today and lets see what results do i get. one tea spoon should about do it right?

[saboor73]

i sprayed wd40 yesterday but to no avail. im going to pour one tea spoon of ATF in it today and lets see what results do i get. one tea spoon should about do it right?

1 tea spoon will be good

[cracked]

Btw, there are huge chances that people get hold of fake products which must not be working. Otherwise osaka and nasa are both well known.we all use nasa carb cleaners so widely

ive tried osaka, guard and nasa and all are same pathetic quality products. if you want to test, then put nasa coolant in a transparent bottle to half, and then put some nuts and bolts in it. you will find them rusted in a month or so. iver tried them all. now using caltex long life coolant. ive used ZIC and its a good product too

[cracked]

1 tea spoon will be good

just put one tea spoon from the passage in TB? what exactly is the machinery that works inside it? i know it controls air intake on idle but how exactly it performs its function?

[abid110]

just put one tea spoon from the passage in TB? what exactly is the machinery that works inside it? i know it controls air intake on idle but how exactly it performs its function?

All air intake is choked through the butterfly closure. Once you press accelerator, the butterfly opens, air is entered in combustion chamber along with fuel. BUT, engine needed a bit of air to remain start/idle (when not moving and accelerator is not pressed). This IAC valve provides calculated amount of air all the time to keep the engine ON without the butterfly being open...hope you got it

[saboor73]

just put one tea spoon from the passage in TB? what exactly is the machinery that works inside it? i know it controls air intake on idle but how exactly it performs its function?

Try to put it in the port of iac.valve It kind of bypass air path with sliding parts to open close air path

[cracked]

Where is port of iac valve? Cuz what ive read on internet is that is moves a plunger to open and close to control air.. So if i just pour atf in it from passage it wont lubricate the plunger which i suppose is located horizontally?

[cracked]

Link for liana's workshop mannual please?

[enthusiastic.learner]

https://www.pakwheels.com/forums/mechanical-electrical/212877-ask-xulfiqar-automotive-encyclopedia-257#post4921863

Well with all due respect to Xulfiqar bro, I don't agree on this. WD40 does a pretty good job in lubricating moving parts that require minimal lubrication and are supposed to be prevented from dirt / dust. I lubricate all my clutch and throttle cables with WD40 and I have noticed that they last roughly 3 times more than they used to do when I would use certain oils. Oil makes dirt particles stick to it which then act like a sandpaper when things are moving whereas WD40 keeps all the dirt and moisture away, besides giving just the right amount of lubrication.

[enthusiastic.learner]

I think the reason to place fuel filter in tank is to make sure fuel line doesn't clog

but it should not clog unless an insane maniac drives around his car with the same filter for 5 lac km. Fuel lines are pretty wide and it is a real pain to pull the fuel tank every once in a while. I have seen on internet that people have done this mod to their cars before. I'm just looking for someone who has tried it here in Pakistan on their cars. If nobody has done it before, I might be the first one to do this. Besides, i'm also planning to make a drain hole in my fuel tank so that I can drain it on regular basis, just to keep things clean!

[cracked]

Can someone guide me how to take off the iac valve with help of pictures?

[enthusiastic.learner]

Can someone guide me how to take off the iac valve with help of pictures?

From Liana service manual. Removal should be self explanatory.

[cracked]

From Liana service manual. Removal should be self explanatory.

kindly share the mannual.. i couldnt find one here.

[saboor73]

kindly share the mannual.. i couldnt find one here.

Suzuki Liana Service Manual.rar

[gullahmad]

but it should not clog unless an insane maniac drives around his car with the same filter for 5 lac km. Fuel lines are pretty wide and it is a real pain to pull the fuel tank every once in a while. I have seen on internet that people have done this mod to their cars before. I'm just looking for someone who has tried it here in Pakistan on their cars. If nobody has done it before, I might be the first one to do this. Besides, i'm also planning to make a drain hole in my fuel tank so that I can drain it on regular basis, just to keep things clean!

Good idea !

[cracked]

Which sensor/mechanism controls the drop of rpm when acclerator is pressed and released? I mean the rpm is supposed to come down to idle slowly, which sensor makes it to come down slowly? Is it also IAC valve?