Liana owners & fan club

[saboor73]

saboor bhai kindly guide me about IAC valve? should i spray wd40 in it?

No its not good for IAC valve I use power steering fulid to lube iac valve

[cracked]

No its not good for IAC valve I use power steering fulid to lube iac valve

how do i lube IAC valve with power steering fluid? a drop or two poured in the opening you showed in the picture few comments before

[saboor73]

how do i lube IAC valve with power steering fluid? a drop or two poured in the opening you showed in the picture few comments before

Lube it with tea spoon of power steering fulid yes pour it in port I showed in picture don't start car for atleast for 1 hour

[cracked]

Lube it with tea spoon of power steering fulid yes pour it in port I showed in picture don't start car for atleast for 1 hour

thankyou.will try that once i get home. BTW can you guide me where is that TB position sensor located? and how to rectify it if it has been messed up somehow?

[saboor73]

thankyou.will try that once i get home. BTW can you guide me where is that TB position sensor located? and how to rectify it if it has been messed up somehow?

Tps is on throttle plate axle you need a multi meter and check voltage on ct (close throttle) and wot (wide open thorrtle)
Use service manual for value
Anyway if your car is not on cng and you never messed with tps screw that holds then your tps would be good

[bilalawan774]

I checked it today with bonnet open n the compressor isnt engaging.. The rpm rises but the compressor wont click.

cool. now turn the last knob which changes the air through to extreme right wind screen wali side pa and turn ac on wait for few minutes and check if clutch engages then this is panel problem other wise clutch.

[cracked]

Any idea why auto windows slow over time? I saw on youtube to spray silicon sprat on windows channel to help them move easily. Any other ideas?

[gullahmad]

@saboor 73 :
Liana has one cat. Converter or 2 ? I mean one is in start near o2 sensor and other is in below silencer line but without o2 sensor.
Am I right ?

[saboor73]

@saboor 73 :
Liana has one cat. Converter or 2 ? I mean one is in start near o2 sensor and other is in below silencer line but without o2 sensor.
Am I right ?

Liana has one o2 and one catcon

[gullahmad]

Use api sn or sm api sj would clog cat con of your car

Plz saboor bhai explain , what u mean to say:
That api sn, sm are ok and api sj is not ok ?
And also tell that castrol magnetic 10 /40 api sm is ok.
Marketing wala boy says that it sticks with engine when engine is off so when we start engine in next morning engine is more safe to start than other non magnetic oils !
Whats ur take on this ?
Thanks.

[abid110]

Plz saboor bhai explain , what u mean to say:
That api sn, sm are ok and api sj is not ok ?
And also tell that castrol magnetic 10 /40 api sm is ok.
Marketing wala boy says that it sticks with engine when engine is off so when we start engine in next morning engine is more safe to start than other non magnetic oils !
Whats ur take on this ?
Thanks.

Dont think so much. Seriously, dont make yr life difficult. Pour in any reasonable oil but make sure its genuine and not fake. Until and unless its genuine, even the sasta tareen oil of PSO will keep your engine healthy and active till eternity.

[saboor73]

Plz saboor bhai explain , what u mean to say:
That api sn, sm are ok and api sj is not ok ?
And also tell that castrol magnetic 10 /40 api sm is ok.
Marketing wala boy says that it sticks with engine when engine is off so when we start engine in next morning engine is more safe to start than other non magnetic oils !
Whats ur take on this ?
Thanks.

Every engine burns a bit of engine oil through breather pipe/pcv valve high zddp oil like api sj after burn can clog cat con api SL and above oils lack amount of zddp older grade oil had.

[enthusiastic.learner]

I cleaned it without taking it off

Refer to Liana service manual available for download on PakWheels. You won't have these questions then.

[enthusiastic.learner]

No its not good for IAC valve I use power steering fulid to lube iac valve

Precisely why WD40 is not good for the IAC valve? Reasons?

[saboor73]

Precisely why WD40 is not good for the IAC valve? Reasons?

https://www.pakwheels.com/forums/mechanical-electrical/212877-ask-xulfiqar-automotive-encyclopedia-257#post4921863

[abid110]

I poured this 4liters in my new radiator

[saboor73]

I poured this 4liters in my new radiator

This coolant doesn't have good repo
Buy some litmus paper and dip it in coolant after one one week of use if it turn pinkish or red drain it

[hash737]

This coolant doesn't have good repo
Buy some litmus paper and dip it in coolant after one one week of use if it turn pinkish or red drain it

salam,

i wana do this experiment with my alto coolant.

i bought GS OIL coolant (the one which comes in can) so far happy with it. but still want to check.

does litmus paper have any desi name?

is it one of those paper we used to use in chemistry lab to check the acidity of the liquid?

[saboor73]

salam,

i wana do this experiment with my alto coolant.

i bought GS OIL coolant (the one which comes in can) so far happy with it. but still want to check.

does litmus paper have any desi name?

is it one of those paper we used to use in chemistry lab to check the acidity of the liquid?

W.salam
Yes litmus paper is same thing used in lab to check acidic of liquid

[abid110]

This coolant doesn't have good repo
Buy some litmus paper and dip it in coolant after one one week of use if it turn pinkish or red drain it

It is considered the best coolant locally made with good chemicals. Also, ethylene glycol based. What drawbacks you can think of it?