Liqui Moly Ceratec

[cracked]

thnx viqas
ill b waiting for ur input
which flush u used???

[Vaqas1]

Liqui Moly Engine Flush Plus

[raohamid]

brov i asked ur experience..i mean wen u used it,wat were positives of this product

Which product are you asking about? Ceratec, or the flush?

Rao.

[raohamid]

Used Flush in two cars. Using it in my car. Previous oil got bit dirty at 3000KM (Petromin) This time after Flush i see better looking oil. I will do a comparison when my car reaches 3000Km if Flush made any difference.

True, you should see an improvement, although, more of that will depend on the oil you used. Have you used Petromin again?

Rao.

[Vaqas1]

True, you should see an improvement, although, more of that will depend on the oil you used. Have you used Petromin again?

Rao.

Offcourse

[cracked]

rao
im ofcourse askin about the flush!

[onlyfaith]

what is the difference b/w touring high tech motor oil 20w50

and formula super 20w50

[raohamid]

rao
im ofcourse askin about the flush!

Now you're clear! The flush was very efficient at reducing gunk and other nasty things. The smoother engine idling, and slight increase in response is owing to the combination of the flush and ceratec. One thing though, my 2JZ is a VVTi version, there is an oil pressure filter right next to the VVTi sensor on my engine. The flush did a damn good job of choking the oil pressure filter. When the issue was diagnosed, it took 10 minutes to get that cleaned, that's about it. I can't be certain that it was the flush that caused it, but I can't imagine what else did. So, its doing a pretty good job at cleaning the gunk.

Rao.

[cracked]

thnx rao.
i think i shud also get engine flush and then switch to petromin ultra...
so the jusk of old oils get out altogther

[aamirq]

can we use ceratec in used oil i mean if the oil has only been used 1100km? and secondly why does it say that it cannot be used in auto trannys????!!

http://www.liqui-moly.de/liquimoly/mediendb.nsf/gfx/315F4856B709C6E3C12573B000545958/$file/TI%20Cera%20Tec%20oil%20additive.pdf

[margallar]

rao do you know any liquimoly distributor in lahore?

[raohamid]

I only know of Filter House in DHA and Montgomery Road. There are others also though.

Rao.

[umans]

whats the difference between Liqui Moly ceratec and Motor Protect?
seems to be same functionality wise,which one is better to use ain Alto 111000KM driven?

Products - MotorProtect

Products - Cera Tec

In lahore u can get Liqui moly products from Liqui Moly Pakistan.
but ceratech is not available there.

[zank]

thnx rao.
i think i shud also get engine flush and then switch to petromin ultra...
so the jusk of old oils get out altogther

To top the cake, use LM MoS2 oil additive with that as an icing, and feel more drive pleasure.

[zank]

can we use ceratec in used oil i mean if the oil has only been used 1100km?

CeraTec can be used with new and used oil both. Just give it some good kms with oil to settle in and get into work, and that is around 5000 kms. Draining oil before that might get some of its particles out too.
Ideally when mixed with fresh oil and after a flush, it gets to work more easily and effectively.

[usmantsdiiqui]

As far as i know Motor Protect is only for synthetic lubricants while ceratec is suitable for all engine types.

[zank]

whats the difference between Liqui Moly ceratec and Motor Protect?
seems to be same functionality wise,which one is better to use ain Alto 111000KM driven?

Products - MotorProtect

Products - Cera Tec

In lahore u can get Liqui moly products from Liqui Moly Pakistan.
but ceratech is not available there.

Replied in another thread too, copy pasting from there
Ceratec is somewhat a new research product with its micro ceramic based coating (less than 0.5um) that can last in more extreme and tough situations upto 200 C. Though it does more or less the same as like Motor Protect usually But is just better than it.
If you are very price conscious, you can use Motor Protect too. But I will always prefer CeraTec over a 500 rupees difference (for 50K Kms)

Cant say anything about its availability in Lahore.

[zank]

As far as i know Motor Protect is only for synthetic lubricants while ceratec is suitable for all engine types.

Not really. Motor Protect itself is a fully synthetic product, but can be used with any oil.
Liqui-Moly itself says "Motor Protect is compatible with all commercially available mineral-based and synthetic-based engine oils"

[Vaqas1]

whats the difference between Liqui Moly ceratec and Motor Protect?
seems to be same functionality wise,which one is better to use ain Alto 111000KM driven?

Products - MotorProtect

Products - Cera Tec

In lahore u can get Liqui moly products from Liqui Moly Pakistan.
but ceratech is not available there.

Motor Protect is Teflon based,

Ceratec is Ceramic based.

Ceratec is better but Motor protect can also be effective.

[zank]

Motor Protect is Teflon based.

No I don't think so. Where you heard/read this?
But I think teflon is used in their MoS2 oil additive, not sure about it also.