Little DIYs for My Khyber

[Skill]

I dont intend to hurt you,but seat covers should be skin tight.

[bluespark]

I dont intend to hurt you,but seat covers should be skin tight.

brother now they are, actually initially there like stiff but after little use they have settled well!! still little corners at top are not fully fit but considering that we have limited variety here in Atd, Im quite happy with!!

There is nothing in your point which could hurt!!

[umair911]

brother now they are, actually initially there like stiff but after little use they have settled well!! still little corners at top are not fully fit but considering that we have limited variety here in Atd, Im quite happy with!!

There is nothing in your point which could hurt!!

wasay blue coming to pindi and get these thing in one go aint bad idea........nd there is one hell of varity in pindi saddar for all cars

[bluespark]

wasay blue coming to pindi and get these thing in one go aint bad idea........nd there is one hell of varity in pindi saddar for all cars

good idea:) will try this next time! Im not much into these stuff. Its just my seat covers need to be replaced so I got them changed!!

[hamza_xeg]

Hamza the shop is behind Niazi autos Jab pul. Shop's name is Ishtiaq decoration. You have to take left turn from main round in front of Niazi autos.

Give my reference as Dr.Yasir from Ayub medical complex.

pre price is given in main thread, I got it for 11.5k!! from Cool voice Pindi!

Thanks for the reply
I will surely check it out (H)

[bluespark]

Looking neat and clean.
BTW What is that switch for?
The one besides the rear defogger's switch?

Correction to my early reply, this is In fact the wonder switch of CNG Don't know why I couldn't figured that out earlier!!

[440]

nice work

[umair911]

Correction to my early reply, this is In fact the wonder switch of CNG Don't know why I couldn't figured that out earlier!!

HAHAHAHA.......Cha gai ho Blue D:D:P:P

[bluespark]

HAHAHAHA.......Cha gai ho Blue D:D:P:P

Dym:) happens sometime!!! And I was like WT4, why I couldn't get it earlier when I looked at it hundreds of time everyday:)(H)

[Xulfiqar]

not to burst your bubble - but the seats in the later khybers were completely garbage, no support whatsoever anywhere, The older ones were nicer.

Anyway - I find its best to invest in a very good set of seats and have them refinished in quality fabric. The difference is night and day. Try looking for some SAAB seats - those seats are known to be made by the hand of God. they hug your body perfectly.

[bluespark]

not to burst your bubble - but the seats in the later khybers were completely garbage, no support whatsoever anywhere, The older ones were nicer.

Anyway - I find its best to invest in a very good set of seats and have them refinished in quality fabric. The difference is night and day. Try looking for some SAAB seats - those seats are known to be made by the hand of God. they hug your body perfectly.

sure Sir, but Xulfiqar bhai can we find SAAB seats in Pakistan? I mean if im not wrong this brand is not available in cars at least!! what do you say..

any alternative in whatever is available in Pakistan?

Seats covers were put just to cover seats, as old one was gone as you can se from pix!!

BTW I was planning for re-doing seats! lets see If I can get good suggetsions from fellows about some shop in Pindi/Isb!

[umair911]

sure Sir, but Xulfiqar bhai can we find SAAB seats in Pakistan? I mean if im not wrong this brand is not available in cars at least!! what do you say..

any alternative in whatever is available in Pakistan?

Seats covers were put just to cover seats, as old one was gone as you can se from pix!!

BTW I was planning for re-doing seats! lets see If I can get good suggetsions from fellows about some shop in Pindi/Isb!

yar i think if u can get Vitz 08 model seats then they r just gr8.......

long drive pay to full sakun scene hai

[Xulfiqar]

of course you can - Ive bought SAAB seats from shershah karachi, SAAB fuse boxes, and an entire engine transmission assy for an oldschool 900 turbo. (the reverse engine type)

They sell for quite cheap as no-one buys them, these type are usually are bought by Bus body makers - to make them fit you would need to redesign the seat frame.

[bluespark]

of course you can - Ive bought SAAB seats from shershah karachi, SAAB fuse boxes, and an entire engine transmission assy for an oldschool 900 turbo. (the reverse engine type)

They sell for quite cheap as no-one buys them, these type are usually are bought by Bus body makers - to make them fit you would need to redesign the seat frame.

Zulfiqar bhai, i cant see it happening for 2 reasons, first Karachi is way far from my city (abbottabad) and secondly no one can source that for me:(

Anyway!! i will think over Vitz seats!!

meanwhile, changed the reverse lights switch! check it out!!

[bluespark]

[deadonice]

nice DIY...
btw whats the price of black spray can these days?

120 rs for the spray can

[Xulfiqar]

you installed the switch with no separating connector?

[bluespark]

you installed the switch with no separating connector?

dont know My brother installed!!

I think the grip is different of this connector and the actual wire of car, so he I guess removed it. But I don't exactly know!~

[Xulfiqar]

buy a 2 pin connector, 2 pieces each of male and female spades for it, and crimp+solder the wires to the connectors, plug them in and you have a detachable plug, in this case if you remove the gearbox the wiring must be cut again.

[bluespark]

changed lights of my car's speedo to blue ones and also installed an LED strip behind the AC pannel to make it glow blue.

Now my dash matches perfectly with the pre display.

Please note that these are mobile cam pix and are anyway near to what actually it is! will try to get better pix!