MOC - M151 Owners Club, Pakistan

[sarmadqureshi]

Good, as long as there's no rusting, denting or replacing of body panels. As for the mechanicals, you will learn as you go how to improvise upon them.

[abmfaisal]

Hi Sarmad
whats the better option. Once again. Deisel engine vs Petrol(Genuine) engine.
IF Gunuine engine is fine and working, so is a wise descision to change it to diesel.

Rest news is I hav started the work on it. there was no denting. But only engine issue and thinking what to do with the back. Either to close it permanent. or to make small door removeable.

What are the suggestions.

[aminfaheem]

Looking good Fahim, What are you not happy with ? Is it running fine ?

The On/Off switch, I'm seeing this for the 1st time, what's that extended part on the right.

The other thing I noticed, your data plates are as good as new. Had them made or what ?

Though it is running fine but
its throtle is not working
Hoodbars are not complete hood is under repairs as well
Fuel cap, choke button, radiator cap are not original ( I have original choke and fuel cap but both require repairs)
wipers blades are not ok require to be replaced
battery plates are missing
jerry makes noises need some support underneath either wooden or rubber
One additional spare wheel is required ( have one but again need to be painted)
Seats . . . . huh they look awful specially back seat
there are various things like this

the extended part of on/off switch is just for support i presume as this must be of some other machine as myself has not seen this anywhere else.
Data plates are newly made.

[sarmadqureshi]

Though it is running fine but
its throtle is not working
Hoodbars are not complete hood is under repairs as well
Fuel cap, choke button, radiator cap are not original ( I have original choke and fuel cap but both require repairs)
wipers blades are not ok require to be replaced
battery plates are missing
jerry makes noises need some support underneath either wooden or rubber
One additional spare wheel is required ( have one but again need to be painted)
Seats . . . . huh they look awful specially back seat
there are various things like this

the extended part of on/off switch is just for support i presume as this must be of some other machine as myself has not seen this anywhere else.
Data plates are newly made.

Little bit of work keeps up coming and going, no worries.

I'm interested in the data plates, can you tell me where you got them made from and how much did they cost ?
Thanks.

[sarmadqureshi]

Hi Sarmad
whats the better option. Once again. Deisel engine vs Petrol(Genuine) engine.
IF Gunuine engine is fine and working, so is a wise descision to change it to diesel.

Rest news is I hav started the work on it. there was no denting. But only engine issue and thinking what to do with the back. Either to close it permanent. or to make small door removeable.

What are the suggestions.

Faisal, it all depends on your own preference. Naturally a petrol is suited but if that's given way then one can go in for a diesel. Expect teething issues with the conversion initially, once you drive around and all you be able to have them pointed out and fixed.

In my opinion, if the original is working fine then stick with it till it lasts.

[sarmadqureshi]

Does anyone know whether these Alligator Clips are available here anywhere ?

[abmfaisal]

Faisal, it all depends on your own preference. Naturally a petrol is suited but if that's given way then one can go in for a diesel. Expect teething issues with the conversion initially, once you drive around and all you be able to have them pointed out and fixed.

In my opinion, if the original is working fine then stick with it till it lasts.

Thanks Sarmad for your advice.
Rest in another thread you asked for the dataplates, I suggest you to go the shops where honor sheilds are made for army, police and other organisations. they will make it because i went there and asked the price is according to the size. not much expensive. the bigger plate will not be more than 700. as the shopkeeper told me the size of 4"x9" will be around 700. so try that one. I asked it in Rawalpindi. by the way which city you belong?

[sarmadqureshi]

Thanks Faisal. Have been thinking of going to these guys too myself.

As the profile says, I'm based in Karachi .......... and I belong to Pakistan (H)

[amohsin1]

SARMAD,

call me i will give you details who is making these plates in karachi, any kind of plates

[abmfaisal]

How much for one plate?

[sarmadqureshi]

How much for one plate?

700-900 a piece, depending on what it has

[sarmadqureshi]

Anything latest fellas ?

[amohsin1]

no activities

[sarmadqureshi]

I busted my radiator somehow........ how I dont know. I took the kids for a little drive in the KHUDD in Phase 8 on Sunday and since then I've being seeing the coolant dripping. Yesterday I took my daughter for a drive and the whole thing leaked.

The cap's internal spring has given way, that could be a reason but I need to open it up to check the bottom and the hoses.

We get 'brand new' radiators, what in your opinion would fit a Mutt ?

[abmfaisal]

My jeep is in workshop. I am waiting for the parts, like seat, lights etc. GOt engine parts, rings pistons etc. and soon will be fixed and engine will start. once its started then hope paint job will be done at earliest.

[amohsin1]

what parts you need???

[Capt.W.M.Khan]

HI there, Asalamalikum LEt me Know if any one NEEd the ORIGINAL BACK Seat of M-151 A2 its in a Good condition, With a Black Regzine cover on it, and MAin ASSEmbly Avoinics Switches, the Analog One...

[fahimsohail]

HI there, Asalamalikum LEt me Know if any one NEEd the ORIGINAL BACK Seat of M-151 A2 its in a Good condition, With a Black Regzine cover on it, and MAin ASSEmbly Avoinics Switches, the Analog One...

whtz your demand for back seat?

[Capt.W.M.Khan]

<TABLE class=tborder id=post2135432 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR vAlign=top><TD class=alt1 id=td_post_2135432 style="BORDER-RIGHT: #c7e2f0 1px solid">@ Fahim sahab asalamalikum, Iam asking R.s. 2000 for the BAck seat... The Seat is in a Good COnsiderable fine Condition... Its not just a Simple Frame like (auction condition) INFACt its a complete cussion black Regzine seat build up on the Frame Aswell... it was kept free with No use with me as i luckily get it as AN EXTRA one, So thought to sell it off. probably any one might in need of it... so in that case Let me know, in any one intrerested...

Regards
Capt. Waqar M. KHan

</TD></TR><TR><TD class=alt2 style="BORDER-RIGHT: #c7e2f0 1px solid; BORDER-TOP: #c7e2f0 0px solid; BORDER-LEFT: #c7e2f0 1px solid; BORDER-BOTTOM: #c7e2f0 1px solid"> </TD><TD class=alt1 style="BORDER-RIGHT: #c7e2f0 1px solid; BORDER-TOP: #c7e2f0 0px solid; BORDER-LEFT: #c7e2f0 0px solid; BORDER-BOTTOM: #c7e2f0 1px solid" align=right></TD></TR></TBODY></TABLE>

[Capt.W.M.Khan]

@ Fahim sahab asalamalikum, Iam asking R.s. 2000 for the BAck seat... The Seat is in a Good COnsiderable fine Condition... Its not just a Simple Frame like (auction condition) INFACt its a complete cussion black Regzine seat build up on the Frame Aswell... it was kept free with No use with me as i luckily get it as AN EXTRA one, So thought to sell it off. probably any one might in need of it... so in that case Let me know, in any one intrerested...

Regards
Capt. Waqar M. KHan