Need help regarding Passo 2008 Engine check light code P1510

[khurram_khan1986]

My Passo model 2008 got into major accident from front side resulted in both airbags deployment. I got it repaired from Workshop in karachi at Garden area. but when car was powered on, engine check light prompted after 5 min of engine start. when error checked through scanner, it gives trouble code of P1510 with unidentified DTC. Upon clearing from Scanner, it did disappeared. But on 2nd start up, it appeared again & not being able to be cleared from scanner. Moreover, there is some mysterious sound coming either from timing chain or airhose leakage from tappet cover ( suspected from my visual inspection) for only 10 seconds, when accelerator is releases after given it max. But this sound goes off immediately when i give little accelerator again. I need urgent help from Pakwheelers community who faced the same error as i am totally stuck on this error.

Plz recommend me good EFI Engine mechanic or Japanese car specialist mechanic in karachi area. As this engine check light does not give accurate fault indentification. I will be really grateful.

Regards
Khurram Khan

[capsat]

did you replaced the airbags or some desi juggar is done to hide the collison repairs.

read this thread for P1510

[khurram_khan1986]

Yes i have replaced airbags (driver + passenger side). Scanner has detected it with some other codes. Plz see attached pic of all codes. I have already gone through the post referred in your reply. Now i will check

1) starter motor solenoid relay bcz my battery is all perfect (Brand new AGS sp 65 installed).
2) i will recheck the wiring. Might be it is short with the body.

[capsat]

what was the source of airbags. Scrap yard? because the error of squib is indication of faulty triggering sensor detecting short circuit.

check this video

[khurram_khan1986]

Yes i have purchased it from kabli auto parts. But i am awared of airbag related codes bcz currently, they are in deployed status so i just installed both (driver + passenger) airbags but re-programming of airbag control module & replacement of seat belts are pending that's why airbag related codes are still appearing. I think airbag related codes will be sorted out. My main question is related to P1510 engine check light . . Plz give me tips or recommend me any good mechanic in karachi . .

[capsat]

what other work has been done in engine bay. any other part changed in engine from scrap yard.
sometimes when engine parts are swapped over physical appearances the technical specs does not match.

over google - 2008 model daihatsu boon ( passo ) P1510 is transcribed as ignition system fault / start motor solenoid fault.

over the side note. I'd suggest to please check the wiring plugs over MAF / TB / Ignition plugs - coils. There is likely possibility that some of the wiring connectors are fractures and short is triggering the P1510.