Nissan B13 Restoration

[fnsatti]

Day well spent my friend.
Best of luck for future...

[star2]

Day well spent my friend.
Best of luck for future...

Thank you brother, obliged.

[drift222]

lagta hai khi registered cars kuch zyda he pasand hain aap ko, even the Honda city parked is also khi registered.

Best of Luck for project.

[star2]

lagta hai khi registered cars kuch zyda he pasand hain aap ko, even the Honda city parked is also khi registered.

Best of Luck for project.

Thank you :). Don't know why is that, but always found a good deal and good car in KHI registered, so never hesitated

[ZEE82]

Which engine did u decoded to put under the hood?

[star2]

Which engine did u decoded to put under the hood?

At the moment, chances are I will get a QG18DE with CVT gear.

[syncview]

thread subscribed! have heard a lot from you, would love to see the progress here.

Btw, from where are you getting the work done?

[star2]

thread subscribed! have heard a lot from you, would love to see the progress here.

Btw, from where are you getting the work done?

Thanks. The workshop is nearby my home, Johar Town, E Block.

[syncview]

I would like to visit sometime if you don't mind

[ZEE82]

and what abt its brakes upgradation afterwards???ABS or perforated discs?

[SER_GTR]

I Prefer Not Less Than B13 SE-R's 4 Wheel Disc With ABS .....!

[star2]

I would like to visit sometime if you don't mind

Sir you are most welcome.

and what abt its brakes upgradation afterwards???ABS or perforated discs?

I am lacking complete knowledge about ABS systems, so for the time being, we will stick to the current braking set-up at least till the current jobs are completely done i.e. engine mechanical, engine electrical, AC, denting/painting.......

I Prefer Not Less Than B13 SE-R's 4 Wheel Disc With ABS .....!

Sir I would like to get a lead from you on what is practical, If you throw it up I will definitely work on ABS system. As far as I know, I have never seen B13 Hubbs in bilal gunj or scrap market which carry an ABS system.

One lead to go forward in this direction I will give first up is the half cut I am working on, of N16, does have ABS System and it has the routing, plus it has the Hubbs but it will be only for the front and I will never be able to find the rear hubbs for B13 with discs or for that instance ABS. Plus the ABS wiring/piping will be cut off from where the half cut is cut off.

[SER_GTR]

Forget ABS From Now.....Atleast Upgrade The Hubs With Bigger Ventilated Ones .....!!

You Have To Dig Hard Deep Into Braking As You Need To Make Sure What Fits And Suits B13 Best ......!!

I Am Not Sure If N16 Hub Will Fit B13 As There will Be Definite Difference In Lower Arms Of Both...!

[star2]

Forget ABS From Now.....Atleast Upgrade The Hubs With Bigger Ventilated Ones .....!!

You Have To Dig Hard Deep Into Braking As You Need To Make Sure What Fits And Suits B13 Best ......!!

I Am Not Sure If N16 Hub Will Fit B13 As There will Be Definite Difference In Lower Arms Of Both...!

Yes it has, B14 hubbs fit into B13 bolt on and they are ventilated ones, but I have bought new rotors for this B13 from Munir Motor Store While I was in Karachi, so they are brand new. I will see what they put up first up and then we'll decide if we have to go on the B14 ventilated ones. One thing is for sure we have to change the brake booster of stock B13.

[SER_GTR]

As Far As Its Working 100%...It Will Work Fine......!

Get better Disc And Good pads and Drain All The Old Brake Oil.....Overhaul The Complete Braking System.......And You are Good To Go...!

Overhaul Mean Complete Replacement Of Stuff Needed ...Brake Booster...Front Brake Pistons Seals Rear Wheel Cylinder Replacement And Then Bleeding Them Precisely......!

For Suspension....The Front Shocks Need To Be Replaced With Diesel Type...CD17 Type....Will Be Enough

[star2]

As Far As Its Working 100%...It Will Work Fine......!

Get better Disc And Good pads and Drain All The Old Brake Oil.....Overhaul The Complete Braking System.......And You are Good To Go...!

Overhaul Mean Complete Replacement Of Stuff Needed ...Brake Booster...Front Brake Pistons Seals Rear Wheel Cylinder Replacement And Then Bleeding Them Precisely......!

For Suspension....The Front Shocks Need To Be Replaced With Diesel Type...CD17 Type....Will Be Enough

Brake pads are new and OEM replacement from Nissan authorized dealer, as well as rotors as I told you before. Two front brake pipes were replaced recently, one was leak, one had cracks but not leaked so both changed and they are good. Rear brake pads changed as well, about cylinders, not sure, if they needed to be replaced, will replace them if I find them new.

Regarding shocks, original oil filled shocks of B13 were recently placed along with original springs. Will see if they do justice, they are new practically, so hoping they do the trick else another 8-10k

[hamza91]

BOL with the project sir

[star2]

BOL with the project sir

Thanks bro

[spectra]

You have to bear it with me for some days, though we are surely going to do something about it as it will be a picture-heavy thread and I will try to take part B13 this time and will move forward to N16 of @spectra to fiddle with lol

You wish

[IsbCap]

For QG18, you may also need to replace the CV joints (Godday) and related stuff, if you go with the default gearbox of QG18. Fitting QG15 gearbox is a different story.

Not sure about the CVT transmission modification requirements, though.