Nissan B13 Restoration

[IsbCap]

He wont be able to take picture of his katrina kaif as he comes to office on car pool

Ohhh. he claimed a mileage of a CD70 from his B13, and car pool :S

[star2]

I have the details about mounts now and they are same as i suspected but aap ko batatay huey darr lagta hai aur samajh nahin aati ke aao ko samjhayoon kaise

Aaap koshish karin, aik dafa, critisicm waley sensors ki wires nikal kar

[star2]

Okay, today's updates.......

Gadri is cleaned and going to be get in very soon...... Swing arms on the other hand needs overhaul, and its bushes and ball joint will be replaced with OEM replacement......

[star2]

The driver side doors are in now, they are beautifully aligned and I cannot demonstrate here how well they are closing and opening, just with a slightest of push, and with a firm sound..... excellent job by denter.....only because it is given its due time.

Front fender also fitted..... comes on its original fitting and sitting with all its glory.....

[star2]

Lines are all aligned perfectly from front fender to back fender.........

[spectra]

Yaar check engine light aa jati hai. Liimp mode mein chala jata hoonagar criticism sensor kee taar utaar doun tou

[star2]

Yaar check engine light aa jati hai. Liimp mode mein chala jata hoonagar criticism sensor kee taar utaar doun tou

theek kar doon yeh problem ? bus mujhe wiring diagram dhondna parey ga 1976 model spectra ka

just kidding...

[spectra]

U need the engine side mounting bracket from E15 for timing side. For gear side he is not sure because it is automatic but that mount from N16 is to be made slightly shorter by cut and weld. Rest of the two should fit as it is.

[spectra]

With engine side mounting bracket of E15, rubber mount of N16 will be used and everything will get bolt on.

[SER_GTR]

Means Here Brackets As Well As Mounts Need Change Which Mean a Twin COMBO Works Of E15 + N16

Now Get Engine Inside And Work Out On Those Gear Side And Timing Size Mount And Brackets 1st...Once Done...Align Those SUB Frame Mounts...

Keeping In Mind Engine Is Not Pulled Towards Any Side And No Turram Bazzi Is Done While Bolting Them.....

[syncview]

Means Here Brackets As Well As Mounts Need Change Which Mean a Twin COMBO Works Of E15 + N16

Now Get Engine Inside And Work Out On Those Gear Side And Timing Size Mount And Brackets 1st...Once Done...Align Those SUB Frame Mounts...

Keeping In Mind Engine Is Not Pulled Towards Any Side And No Turram Bazzi Is Done While Bolting Them.....

I hope that star2 goes through this easily, because I met those mechanics and electricians - they aren't good listeners.

[SER_GTR]

^^^ That's Common JOE's Story....! Hope For Best

[spectra]

I hope that star2 goes through this easily, because I met those mechanics and electricians - they aren't good listeners.

Looks like @star2 has met his match makes me feel good actually.

[SER_GTR]

^^^ Hahahahahaha

[syncview]

Hahahahahahahahaha

[ZEE82]

Okay denting updates......

Front fender is fixed and sanded ..... base is going to be applied soon I guess.......

Two of the new doors are fitted.... and adjusting them is in process.......

u should dissemble the door fittings for a gud paint n dent.remove all its seals and motors ,glass etc n left it with the metal doors only

[hamza91]

Project going nicely slow but perfect...

[spectra]

I got a call from Mustafeez at 11:44, was asleep. no idea what he was up to at that time.

[star2]

I got a call from Mustafeez at 11:44, was asleep. no idea what he was up to at that time.

wanted to ask about your health my brother. Its good I did not disturb u.

[spectra]

wanted to ask about your health my brother. Its good I did not disturb u.

Oh thank you for that. I am perfectly fine. Enjoying family time in Islamabd and working from Regional office. Thanks to my boss who has allowed me to do this for this week.