Project - Suzuki Khyber

[daniyalahmad]

Assalam-o-Alaikum everyone,
My car had an accident last week and there was some damage done.
Thanks to Almighty Allah no one was hurt.
After the accident I was in the mood of selling it but my denter assured me that the damage is not much and can be easily repaired so now its being repaired.

It is not a big project or restoration.
The main purpose of starting this thread is to get guidance from those people who have kept this car or have done some work on it.

I will try to update this thread on a regular basis.
Your guidance will be highly appreciated.

[daniyalahmad]

The steering got damaged and its one outer end was broken so the Rescue service guys were called.
They used a winch and pulled the car on the truck.
It was later unloaded at the workshop.

[rozzzzz]

dam...when this happened....nazer lagi ha yar...

Khair best of luck with project

Good to know you are safe ....car will be done again

[Owais_Yunus]

I think I saw the car crashed in G-9 near Fast's previous building. Is it the same one?
About the damage, the front end seemed to have bent downwards. I would suggest you to take very precise measurements of a non-accidented khyber and make sure that the denter brings the car back to shape according to those measurements.

[hidalgo]

sad thats a bad hit
i like your car alot it was in proper nick
don t sell it get her fixed it will serve you longer then modern cars
goodluck

[smijaz]

Sorry to see the loss.

I hope and wish that you get your ride back in its original form.

BTW how did this happen?

[-Sammy-]

glad to know no one was hurt , as for car all the best for its restoration

[Ally1]

ALLAH ka shukar no one gets hurt, bro don't even thing to sell this princess dry denting can do work its not that bad as it look just make sure that you pick good denter.

[Ally1]

The steering got damaged and its one outer end was broken so the Rescue service guys were called.
They used a winch and pulled the car on the truck.
It was later unloaded at the workshop.

can u post inside pic it will help to give suggestions i really feel sad to see that:(

[ibadaslam872]

That's one wierd crash :S
Can you please give some details of what happened?

[khyber95]

very sad to see this. and dont worry. it will be fine. a simliar incident happened with me last year . and similar things were broken. dont worry dent will be cleared without paint job . use original head light. i dont remember which i used but its colour is fading now.

[daniyalahmad]

I think I saw the car crashed in G-9 near Fast's previous building. Is it the same one?
About the damage, the front end seemed to have bent downwards. I would suggest you to take very precise measurements of a non-accidented khyber and make sure that the denter brings the car back to shape according to those measurements.

Yes it is the same one.
This happened in front of Pemra head office Islamabad.
Im trying my best to take care of every detail. measuring each and every gap.
Lets see how does it turns out.

dam...when this happened....nazer lagi ha yar...

Khair best of luck with project

Good to know you are safe ....car will be done again

sad thats a bad hit
i like your car alot it was in proper nick
don t sell it get her fixed it will serve you longer then modern cars
goodluck

Sorry to see the loss.

I hope and wish that you get your ride back in its original form.

BTW how did this happen?

glad to know no one was hurt , as for car all the best for its restoration

ALLAH ka shukar no one gets hurt, bro don't even thing to sell this princess dry denting can do work its not that bad as it look just make sure that you pick good denter.

very sad to see this. and dont worry. it will be fine. a simliar incident happened with me last year . and similar things were broken. dont worry dent will be cleared without paint job . use original head light. i dont remember which i used but its colour is fading now.

@All
Thanks alot for the wishes guys.

[daniyalahmad]

can u post inside pic it will help to give suggestions i really feel sad to see that:(

I will get interior pictures tommorow Insha-Allah.

Sorry to see the loss.

I hope and wish that you get your ride back in its original form.

BTW how did this happen?

That's one wierd crash :S
Can you please give some details of what happened?

The road was too smooth.
The car skided on hard braking and banged on the pavement.

[daniyalahmad]

The next day.

Work started.
Removed the bumper,grill and the headlights.

Next the battery, condenser, radiator and finally the engine was taken out.

Fortunately the damage to the chasis is lesser than expected.
However the steering, right axle and the right side tie rod got damaged and will be replaced.
Since the wheel hit the pavement so these parts took greater impact.
The highlighted places are the one that are pushed inwards.

[Ally1]

The next day.

Work started.
Removed the bumper,grill and the headlights.

Next the battery, condenser, radiator and finally the engine was taken out.

Fortunately the damage to the chasis is lesser than expected.
However the steering, right axle and the right side tie rod got damaged and will be replaced.
Since the wheel hit the pavement so these parts took greater impact.
The highlighted places are the one that are pushed inwards.

ALLAH ka shukar hy it wll be fine Inn Sha ALLAH btw please take care of small things which can be easily lost in workshop .

A very best of luck with project

[Ally1]

don't go for any paint job in that circle area just position correct kar lay and use good glass for light rest don't go form complete new light as adjusters are really bad in available lights. light cant be adjusted so just change glass (H)

[istafa111]

Glad to know no one got hurt. As far as the car is concerned, when you take a car on the road, one can always expect an accident. If one doesn't expect to face an accident at all, then he should drive in his drawing room.

The damage on your car isn't much and it would be back in shape. Best of luck for the project.

[zia1288]

Best of luck restoring it. Hope she gets well soon

[aliusman420]

your khyber was one of the cleanest khybers out there
best of luck with the restoration!!

[daniyalahmad]

ALLAH ka shukar hy it wll be fine Inn Sha ALLAH btw please take care of small things which can be easily lost in workshop .

A very best of luck with project

Im trying to bring home every thing that I can.
Only the parts that are needed are left are the workshop.
Thanks for wishing me luck!

don't go for any paint job in that circle area just position correct kar lay and use good glass for light rest don't go form complete new light as adjusters are really bad in available lights. light cant be adjusted so just change glass (H)

We are trying to protect the paint as much as we can.
Now lets see what happens?
Allah kher kare.
Regarding light then Im unable to find the new Koito sealed beam.
Im searching shops in Rwp/Isl.
I wont be going for the cheap Chinese replicas.
They are useless and they fade out very soon.
Do let me know if you know any dealer who has right side OEM headlight assy.

Glad to know no one got hurt. As far as the car is concerned, when you take a car on the road, one can always expect an accident. If one doesn't expect to face an accident at all, then he should drive in his drawing room.

The damage on your car isn't much and it would be back in shape. Best of luck for the project.

Agreed.
Thanks to Almighty Allah that no one was hurt.
Thanks for wishing me Luck!

Best of luck restoring it. Hope she gets well soon

Thanks for the kind words Zia.

your khyber was one of the cleanest khybers out there
best of luck with the restoration!!

Thanks for the wishes Ali.
Lets hope it gets back to its earlier state.