Self Tunning - Khyber G-10 (Plugs, valve clearance, spark gap etc)

[metalhead]

@cracked
You also said earlier that: so anyway i can rectify it?
Do let us know about it...

[cracked]

asked if there is anyway to know the correct rpm and speed..any mathematical formula or stuff!

[metalhead]

You can find many online calculators for speed correction.

If you keep the diameter of tire same as stock by selecting lower profile tire on larger rim, the speed will show no error.

Regarding rpm, i don't know if there is any option inside to switch it to 3-cylinder setting. But when your engine turns 4 revolutions the gauge will show 3 revs. That means at 1000rpm gauge will show 750rpm. Correct me...

[cracked]

ok,so for RPM,its 4/3 ratio? mean any rpm shown if multiplied by .75,should give correct rpm?
how about if i get some after market RPM meter? would it show correct rpms?

[MoizIrfan]

my khyber engine has ceased. it has completed its life.it has been driven approx 4 lakh km. now i want to swap it with some other engine kindly tell me the available options

[cracked]

4 lac? on petrol or cng? or both?
and ever overhauled before?

[MoizIrfan]

over hauled twice only cng used

[ahsanonline]

get one of the 1.3l engines. it'll be a beast.

[MoizIrfan]

its chasis is weak so rebuliding it
estimated cost 30000

[Xplorer]

Is it possible to remove AC's evaporator without removing dash board in Khyber?

[fas133]

There is no need to remove dash board to get the evaporator out in khyber.Just remove the blower unit first and then you can remove the evaporator easily.

[cracked]

yup,who would remove the dash for removal of evaporator? ive got done this twice and was only remved the blower motor compartment!

[daniyalahmad]

My Suzuki Khyber front seats have become quite uncomfortable in a sense that they are leaned backward. Especially the driving seat. So its uncomfortable for both the front and back passengers. I showed it to a poshish wala and he said that the frame has become weak. (I am a bit healthy). Guys what should be the solution? Should I take them to some Khiradia and add more steel bars or buy new seats?

To be very honest the front seats are not that much comfortable.
If I were you then I would have tried to fit in some better and more comfortable ones.

its chasis is weak so rebuliding it
estimated cost 30000

Weak in what sense?
Weak engine mounts?
Rust issues or was the front involved in any severe collision?

Is it possible to remove AC's evaporator without removing dash board in Khyber?

Yes it is possible.
No need to remove the complete dashboard.

[MoizIrfan]

2 front severe colisions causing chasis to bend.
it starts to bend every 6 months from front right fender side

[daniyalahmad]

^ So what do you do the overcome this issue?
Tried any reinforcement to make the chassis a bit more strong?

[MoizIrfan]

thinking of adding a strut bar on top of front suspension, previously we use to repair chasis every 6 to 8 months.
can anyone quote me the price and its availability.
i also need the accurate dimensions of the distance between the front suspension where strut bar will be added.

[speedster_101]

To be very honest the front seats are not that much comfortable.
If I were you then I would have tried to fit in some better and more comfortable ones.

Yes you are right. The front seats are not so comfortable. I was also thinking of placing some other car's seats. Do you have any idea which car seats can be fitted in Khyber?

[speedster_101]

The axles of my Suzuki Khyber are also giving problems. I hear a tuk tuk voice on turnings. The Kabli parts of Suzuki Khyber are very expensive nowadays due to the fact that the production of this car was stopped decades ago, hence the parts are scarce now. Should I go for brand new Chinese ones? Any idea about the cost?

[smijaz]

The axles of my Suzuki Khyber are also giving problems. I hear a tuk tuk voice on turnings. The Kabli parts of Suzuki Khyber are very expensive nowadays due to the fact that the production of this car was stopped decades ago, hence the parts are scarce now. Should I go for brand new Chinese ones? Any idea about the cost?

Japanese pair (Brand: NKN) : 4000/- to 4500/-
Chinese pair : 1700/-

I am using chinese ones they have survived 2 years (Price then was 1200/pair) and now they started to give tak tak when i give them a full turn with above normal speed.

[Deadly_Flame]

Hi guys,

I've read about the temperature gauge being up to the middle is fine, i recently overhauled my engine and before the temp gauge was similar to what daniyal posted but now normally its way up not even in the middle like others. I told the mechanic and he gave me the same reason your mechanics gave you for it being close to the half point mark.

Also another question i am not happy with the performance of the car before overhauling i was able to go upto 140 kph on cng but now its like impossible to go beyond 110 kph, again i enquired my mechanic he said "thora kharcha kerna paray ga uss k liyae" i already paid 48k for the overhaul also it was not complete engine it was just the upperbody i don't know what its called but its the one with pistons neechla portion engine ka theek tha so pura engine was not needed.

So my problem is i want to get my engine checked, if its good or not? Since i am not satisfied with the performance after spending so much money so before i go ahead and do "thora or kharcha" i want to be sure k engine is ok.