SER_GTR's.....Project 86........!

[levin]

Maybe he wants to put something like 3sgte (gen 2 or gen 3 430cc side feed injectors. They bolt straight into the 20V rail and are of similar impedance from memory.

[levin]

1 J injectors are sidefeed will fit and they are 440cc.

[20gze]

Bro i knw ua engine has started..i ve seen the dates mentioned by u...but as u r posting like cleaning wires on day1 ,marking them on day2,cutting them on day3,it will take a whole damn month or more to complete ur post...but u do as u like it..bcz its ua way of posting..ny whn ua vvt part comes then i will ask the probss..

[20gze]

@levin
I was askin will bigger injectors will be useful(mean peformance wise) without using forced induction..will thr b a prob in tuning..

[SER_GTR]

Well Yups..
I Hope Connector Is Also Same Or He Need to Use Injector along with Connector...!
Well Its All Game Of Duty Cycle....! Nowdays The Injector we got from factory runs on almost 70% Duty Cycle....!
Let me gave eg of 20V 295cc SideFed Injectors.....tey are capable of 295cc/min.....and runs on 70% duty cycle a/c to 165hp calculations....
they can fed upto 200hp working on 85% duty cycle.....!
So If You need your injector working on low duty cycle....!
get bigger injector.....! GZE uses 365cc/min injector....!creating same 165hps....reason it uses more bcz of Force Induction.....!

Regards

[levin]

20g: ppl say if one needs F/I ,,,,then need more fuel with that. what's the point of throwing in just fuel? you need turbo and related mgt , and first of all car suspension, brakes should be topclass

[SER_GTR]

@20GZE..
You can have a chat with me on MSN if you need to ask....!
my id is farrukhali86@hotmail.com...!
There is no such thing like VVT part....i just wire its connection on ECU and install VVT Solenoid....! what else it need....!
Regards

[levin]

set gtr: 20v is sidefeed, 16v is topfeed.

[SER_GTR]

Yups..
Its SideFeed...16v 182cc ones are Topfeed....!

[levin]

http://locost7.info/mirror/4age_blacktop.php
A little something for BT fans:)

[20gze]

@levin
with respects bhai...i am not throwing a point..am askin a question
@SER_GTR
got it.thats the answer to my question.thanks

[SER_GTR]

Already Have It
It Also Helps Alot ...!

[salmang]

hi, Mashahallah...
pics are not working with me?

SALMAN

[SER_GTR]

Day 9

18-11-07

Almost After 5 Months....I Open Garage To Finally Awake Sleeping Car :P....! Finally Its Time To Start The Swap Work.....!
Unfortunately...Previous Owner Won't Take Care Of Clutch Cyl Oil...and Result...Air Inside System...Means...Pedal Free...!! So Have To Toe It...Engine Is Start But Clutch Not Working Due To Air Inside Line......!!

Here's How It Looks Like
Dust All Over...!

Dusty Front...!

Front Pose That Grill (A)...Mean...

[Insane_Power]

Good progress for the days spent

[SER_GTR]

Day 10 Swap Started

Early In Morning.....Its Time To Toe It And Take It Where Mounts And Down-piping Work Is Gonna Take Place....!
So I Toe It With My Sunny And Heads Toward Destination...!

Here Its On Way...

After Couple Of Hours...Old 2E-LU Is Finally Out To Say..Good Bye.. You Have Done Your Job..Now Let 4A Bro To Have Some Fun

Engine Room Empty..You Can Also See Steering Rack..Its Gonna Be Installed In Place Of Old One Which Is Leaking Oil...I Grab This One Of AE101....!

After Removing Pipes From 20V BT...The Internal Condition Of Water Flange...

See How Clean It Is From Inside..MASHALLAH ...!

Finally 20V Inn....!Balancing Engine & Matching Mounts Location Making Sure Axles Also Gets Into Proper Direction...!

Engine Mounts..Old Ones...Have To Find A Good Set Of 4...!

Side Looks...Engine Looks Like Its Being FF Into It MASHALLAH.. Also You Can See Ustaad Taking Measurements...!

Side View Along With Shiny Flange Ends

Some Things I Found There...!
Lolx...Coincident....20v ST for Swap Out There

RX-7 Tranny Lying Out There..To Have Some Fittings...!

Almost Hand Made Jeep With Hiace Engine....Big Project..!

Thats All For Day 10.....

Regard

[AkbarGr8]

@SER

Great work man, can you explain the engine balancing part a bit in detail?. how is the string used/what is its purpose?. thanks.

[faadmemood]

@SER_GTR...bruv...uv done a great job....most interesting ever DIY...but probably practical for few..

[SER_GTR]

@Akbar...Well Yaar...He Ties String With Bolts On Chassis...He actually Matches Line to make sure engine is positioned in straight line....!

@f340...Its fun to do jobs like this....i alwayz like to do stuff like that...!!
The fun of driving car on which you work with your own hands is different than driving car which you get just done by others....!
The person done all that work and finally when he drives and fell the work fells how much happy..i can't explain
Regards

[levin]

how much he charge to clean and swap engine and transmission?