Hey guys…so like I said the install is actually in effect..! I wasn’t kidding…
So like you all know that I purchased the parts previously for a 2.1 SQ setup…but this time around I am actually taking it a step further and going all out…this time its gonna be a Multimedia, A.V, 5.1 Channel Surround Sound setup !
My purpose is to have a solid front stage and have the rears and other speakers act as the surround speakers, so no detail is lost at all… handling the 5.1 Channels would be the Pioneer DEQ-P6600 Digital Signal Processor , featuring Dolby® Digital, DTS™ and Dolby® Pro-Logic® II surround sound (for pure 5.1 pleasure) connected via an optical cable to the Pioneer AVH-P6050DVD source unit…providing maximum control and adjustments… in short… loads of perks !! 
The purpose behind going for a 5.1 A.V setup is that I want to enjoy music videos and other 5.1 media, specially the live music concerts recorded in 5.1 channel surround sound.
Anywho…ill stop talking now and lets the pics do it for me…
I present to you…the new additions for the setup !
First off…
FOCAL POLYGLASS 165 CV1, 6.5” coaxial as rear surrounds.
Specs:
• 2-way 6-3/4" speakers
• Polyglass woofer with butyl rubber surround
• Rotating aluminum inverted dome tweeter
• Non-resonant ABS/glass fiber basket
• Grilles included
• 2-70 watts RMS power range (140 watts peak)
• Frequency response: 60-20,000 Hz
• Sensitivity: 93 dB
• Depth: 2-3/4"
Pics:




I have a feeling these Polyglass coaxial will beautifully compliment the front Focal 165 KRX2’s…so they had to be the obvious choice…. Focal = fidelity !
.
.
.
.
.
.
.
.
and to put the cherry on the cake, the final product is…
Pioneer TS-CX900, KEVLAR Series, 2-way center channel speaker
Specs:
• 2-Way A/V centre Speaker Kevlar Series
• Sealed enclosure design for easy installation, typically on the vehicle dashboard or roof mounted for 5.1Ch application
• 66 mm KEVLAR® Brand Fiber composite cone woofer
• 25mm balanced dome tweeter with neodymium magnet
• Butyl rubber surround
• Compact aerodynamic cabinet design
• Double neodymium magnet assembly with magnetically shielded circuit design
• Maximum input: 80 W
• Nominal input: 20 W
• Butyl rubber rolled edge
• Heat-resistant voice coil
• Neodymium magnet: 16 g (0.56 oz)
• Tweeter diameters: 25 mm (1in Dia.) Magnesium dome
• Cabinet material Heat-resistant ABS
Pics




Every SQ setup should have a strong front stage…and what better way to pursue that than getting a center channel speaker dedicated to detail…in my opinion it is a very essential component in this setup…
The center channel has to be versatile enough to handle anything in the forefront of the soundtrack/ Video, Explosions/ gunfire/whatever, So it's frequency response is crucial and the Pioneer unit here really delivers in this regard…I have a feeling this expense will really reap benefits at the highest.
So I guess now ur getting the gist of where i am headed…keep visiting the thread for updates regarding the setup…pics of the install etc… Ciao…