Suzuki Cultus Fan Club (2000-2016)

[margallar]

i am not sure if it would bolt right up, even if it did, the combustion chamber volume may be off and may raise compression ratio too much

or valves could hit the piston

or you could get lucky if it worked

But even if the g13bb and g10b heads were same ,it is not a smart idea to run the cultus ecu on the baleno engine. It would run poorly and lean or in open loop (check light)

[RehanBhatti]

Hmm. So g15 engine is ls the last resort to increase low end torque.

[margallar]

There are other ways, like aftermarket efi kit.

But that will only give limited gains.

Best to live with it. Cultus is great at saving fuel, enjoy that.

Meanwhile, check the brakes for drag, proper tyre pressure and avoid viscous engine oil

[RehanBhatti]

Yes. Your are right. How to fix rattling sound of mixed up valve rockers. Idiot mechanic did not mark them before dismantling the cylinder head.valve lash has been adjusted accorinding to service manual already. But they still make noise.

[margallar]

New cam and rockers is the only way....

[RehanBhatti]

Ohh really. New means brand new or kabli?

[margallar]

kabli set, of cam and rockers will work, if you dont mix them up, while removing from head.

same fuckup happened to one of my cars.. chal ri hai ayse hee. i will see if it gets any better with time

[RehanBhatti]

Oh. Sad to know. Is yours 16 valves which is making noise?

[margallar]

yep. alot more combinations to try your luck....

[RehanBhatti]

Yes. Inlet valve lash is set at 13 and exhaust side is at 18. Zic 10w40 api SL diesel oil is being used from last one and half years. The setting and oil reduced a lot of clattering noise. Btw, engine performance is top notch.

[last_look]

i have a small problem that when ever i touch the brake pedal the interior lights gets dim slightly and my exterior lights has a small flicker is it something to be worry about? Possible culprit ?

anybody?

[last_look]

can someone identify the part encircled red some one had removed this from my car

[margallar]

Charcoal canister.

[abid110]

@margallar is it true that Cultus's and mehran's kabli saman is a rare item since both are Paki cars long discontinued in international markets?

[margallar]

Cultus parts are still available. Mehran ones, imported kabli is getting abit hard, alot of stuff is repaired or local used

[margallar]

grounding points are dirty, they get dim because the ground wiring gets stressed by brake lights

[Vaqas1]

Here in Chah Sultan people demanding 9k for EPS.

[margallar]

Thats approx parts cost in bilal gunj

[Massive_One]

Brothers i need sincere advice. I have cultus 2016 model and i need to convert its steering to EPS. Is it wise to do so? And there is no harm, from where i can get it done in lahore?

Caristaniyan is a youtube channel, the guy name Surkhail opened his workshop recently in Johar Twon, named Carigar Restomods, you can search it on google maps too. I asked him recently for Cultus conversion to power steering and he quoted me around 14 thousands for the job.

[chshahid2k]

Assalamualaikum

Yesterday I went to Suzuki 3S dealership and asked the price of radiator cap because my car was continuously reducing the coolant mechanic suggested me to replace the radiator cap because its seal might be worn out. The Suzuki guy quoted me the price of Rs 906. I I bought the cap with the huge discount of 6 rupees. I still have to check if it works or not.

Also there is a sound of tuk tuk coming from my steering assembly the same happened last year as well so I went to a mechanic and he open up the assembly and sent it to a laith wala. He also replaced bushes and boots. But the whole thing worked only for some 15000 kilometers and within a period of an year the problem came back. So for this fix I asked the price of Cultus geniune steering assembly and they quoted me RS 57,000. Which is too much for me. So I need your opinion for this issue.
Thanks
Allah Hafiz