80 Series Discussions

[margallar]

if there is some aftermarket oil pressure gauge, which comes with its own sensor, that might be a good idea

[mshoaib432722]

Few months back i was messing around with the breather valve... Felt like it had some kind of spring loaded plate inside. When u press it there's a hiss sound.
Now i understand that there used to be a little vacuum created inside tube, which i think is bad design from toyota. Vacuum means diff will try to suck air / moisture through any seals it can... may be grease in hubs can also be sucked into diff tube too!

[Xulfiqar]

This is a level gauge - its the same thing like the float in your toilet flush tank.

[Xulfiqar]

Yes, and thats why the real mud rig owners mod it and install longer vents with little filters on top. The vacuum thing done by toyota is (in my opinion only) to remove air bubbles from the oil, the oil will very quickly de-aerate but also carries risk of seals letting go if that valve decides not to work

[mshoaib432722]

Alright. And after bringing all those vents up in engine bay, what to connect at the hose ends? The same breather plugs or some other device?

[Xulfiqar]

find a tiny air filter - like the ones you see the CD70 awaam install on their "wheelie" bikes

[tintin1]

This post was flagged by the community and is temporarily hidden.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[omersiddiqui5482]

Wah. Very good !!! It make me feel so guilty that Pata Nai Kitni Bari Mistake Kar Di Main Ney Iss BenChod Jeep Ko Ley Ker.

@tintin1 sir, cool down, dont get jazbaati. Relax!

[tintin1]

This post was flagged by the community and is temporarily hidden.

[Thinking]

apparently a replacement might fit and might work as well however the calibration would be different.

like for a 2C engine full level oil mark is around 4 Litres of oil and for your ride its around 7.2 Litres of oil.

better would b to find a person in peshawar who knows pashto and can go to old kabli parts market (since they r the source to all markets in pakistan). once he finds the qabli replacement, get it with the warranty to keep it if it works.

(kabli parts have a saying associated to them, chalay to japan tak, na chalay tow sham tak)

saving 35K by putting in the effort to find qabli replacement would be worth it i think.

besides another approach could be to take out ur current sensor. get it inspected and fixed. it might be repairable if its just a float type sensor.

[omersiddiqui5482]

what is the exact part number for the Sensor/sending unit you require for your 1HD-T engine! may be just may be it is available in Karachi. i can try to find one atleast.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[mshoaib432722]

Yaar ye same sensor coasters may bhi dalta hai.

Chassis:
BB40
BB40R
BB46
BB55
BB58
HDB50
HDB51
HZB40
HZB41
HZB50
HZB50L
HZB50R
HZB56

Engine:
15BF
1HDFT
1HDT
1HZ
1HZT
3B

Coasters ka kaam jahan hota hai wahan try maaro. Mil jana chahiay!

[Thinking]

there is a specialized coaster market on ijp road rwp

[usman1texh]

Yesterday I asked a simple question that 285mm tire would be OK to use in my jeep which he gave a link of a looooong table with hundreds of different information. Why? He could simply reply in Yes or No !!.But actually he don’t know its answer either.

I just looked at the tables capsat shared and honestly it's very helpful. If I had asked him the question and he shared the link with me I would actually be very grateful. Why? Because he took the pain of finding the link for me and sharing it on the forum. It's a useful guide that can be applied to any vehicle/tire combination.
I read the entire table just for the heck of it. Because why not? It only helps me to understand things I didn't know.

[dayrider]

@tintin1 bring the price to a reasonable amount, sell it for 19, swallow your losses, buy a 2004 indus camry with a piece or two touch for 18, spend one on it for regular maintenance and enjoy it.
The sort of off roading you do with this jeep, can easily be done by that.
This is the only solution.

[tintin1]

This post was flagged by the community and is temporarily hidden.

[tintin1]

This post was flagged by the community and is temporarily hidden.