80 Series Discussions

Tags: #<Tag:0x007f9cf720ac60>

xenerking (xenerking) 2020-10-02 21:01:02 +0500 #7806

same ol` pakistani jo

nooire731 (Noor Aftab Ahmad) 2020-10-02 21:17:17 +0500 #7807

Sorry I am off topic but as I know coffee is discovered and used as energy drink in Ethiopia, Yemen etc and used to serve as energy drink to Hujjaj while performing Hajj to relieve the symptoms of exhaustion, Turkish introduced coffee to Europe, kindly correct me if I am wrong.

tintin1 (tintin1) 2020-10-02 21:23:27 +0500 #7808

This post was flagged by the community and is temporarily hidden.

UAHMAD (UAHMAD) 2020-10-02 21:35:47 +0500 #7809

Khuda khuda kar kay kufar toota, aur aap bhi bolay. Ye shayad coffee kay karshimay hein.

Brother @tariqazama wanted to know about a good grease brand for CV joint before the start of coffee discussion.

Thanks

Xulfiqar (Xulfiqar) 2020-10-02 21:49:42 +0500 #7810

you can buy LM47 from liqui moly - its good for CV joint, Similar greases from Mobil, Fina etc is also available - basically any EP grease with NLGI1 or 2 grade with at minimum of 3% moly content.

tintin1 (tintin1) 2020-10-02 23:53:47 +0500 #7811

This post was flagged by the community and is temporarily hidden.

tintin1 (tintin1) 2020-10-02 23:58:06 +0500 #7812

This post was flagged by the community and is temporarily hidden.

tintin1 (tintin1) 2020-10-03 00:05:02 +0500 #7813

This post was flagged by the community and is temporarily hidden.

tintin1 (tintin1) 2020-10-03 00:07:48 +0500 #7814

This post was flagged by the community and is temporarily hidden.

mshoaib432722 (Shoaib) 2020-10-03 18:33:30 +0500 #7815

Sir ji. Tomorrow i will install the aftermarket transmission oil cooler in my 1kz prado 1993. Does the cooler installation height matters or i can just mount it as i wish (right infront of AC condensor) or it should be at lower height?

Proverbial_Slang (Proverbial_Slang) 2020-10-03 19:43:37 +0500 #7816

That would be a 70 series, not an 80 series.

Xulfiqar (Xulfiqar) 2020-10-03 20:47:07 +0500 #7817

The height doesnt matter, make sure it has plenty airflow and make sure the inlet side is low and exit side is higher to prevent air lock inside it.

tintin1 (tintin1) 2020-10-03 21:40:05 +0500 #7818

This post was flagged by the community and is temporarily hidden.

mshoaib432722 (Shoaib) 2020-10-03 23:38:17 +0500 #7819

DIY as usual

tintin1 (tintin1) 2020-10-04 17:30:03 +0500 #7821

This post was flagged by the community and is temporarily hidden.

mshoaib432722 (Shoaib) 2020-10-04 22:29:11 +0500 #7822

Didnt take pics as i alone was doing the DIY.
Washed it with hot transformer oil at PEL factory. Dried with some big petrol pump filling like machine, throwing high pressure dry air at PEL. Used rubber pipes to connect.

Xulfiqar (Xulfiqar) 2020-10-05 05:27:07 +0500 #7823

Make sure those pipes are rated to run with automatic transmission oil. Regular rubber hose disintegrates

tintin1 (tintin1) 2020-10-05 11:56:14 +0500 #7824

This post was flagged by the community and is temporarily hidden.

umairjamil6 (30w50) 2020-10-05 22:17:24 +0500 #7825

Pakistani awam hates espresso more than india. But whwre is essajee. I am interested.

Xulfiqar (Xulfiqar) 2020-10-05 23:15:47 +0500 #7826

That is because 95% awaam have never had a real espresso shot. Its very difficult to get correct.

These instant brews are not even close.