Rebuilding TRIUMPH HERALD 63 "ORIGINAL CONVERTIBLE" for my son (Spitfire)

Tags: #<Tag:0x000000095d0198>

spitfire (spitfire) 2012-10-09 13:21:55 +0500 #401

A top view....The wide place you see above is for the drain hole......

spitfire (spitfire) 2012-10-09 13:28:33 +0500 #402

As I told you That We had to move our project car from the previous place.....and work stopped for a while......
So its new place (though not very ideal) And Here is our Herald....

spitfire (spitfire) 2012-10-09 13:31:35 +0500 #403

Rear End temporarily attached to move the car to this new destination .....and will be removed....to work upon...

spitfire (spitfire) 2012-10-09 13:38:03 +0500 #404

Right rear floor pan was sanded and primed to prevent rusting ....This primer is temporary and will be removed once we fit the panel in place.....for sealing joints and for final priming/painting....

spitfire (spitfire) 2012-10-09 13:43:45 +0500 #405

My son with his herald.....

spitfire (spitfire) 2012-10-09 13:46:32 +0500 #406

Left rear floor pan also complete and primed ......But....

spitfire (spitfire) 2012-10-09 13:53:55 +0500 #407

Found some minor iregularities in design .....which hardly matters......But You know....Perfectionist is Perfectionist......
In simple words ....I will describe it as ....

" KHARABIAY DIMAGH KA KOI HAL NAHIN "......LOLZZZZ...

.........................OR...........

This Kind of perfection ====== JAHLIAT.....:D....

But you know ,we cant help it ....

spitfire (spitfire) 2012-10-09 14:00:33 +0500 #408

so the scene is something like this....

spitfire (spitfire) 2012-10-09 14:03:56 +0500 #409

Ok.......Can you feel the minor error here...?

spitfire (spitfire) 2012-10-09 14:16:53 +0500 #410

Hmmmm.....the last two grooves are a "Little Narrow".......So some fine arts being done....

spitfire (spitfire) 2012-10-09 14:23:49 +0500 #411

In the mean while we had Good "KARAK" tea from "KHOKHA"....empty cups can be seen....

wasay_ahmed (wasay_ahmed) 2012-10-09 14:29:06 +0500 #412

nice pace this time

spitfire (spitfire) 2012-10-09 14:33:37 +0500 #413

For this kind of "fine arts" a straight edge/Ruler was required ....So a hacksaw blade is being fetched for the above stated purpose....

spitfire (spitfire) 2012-10-09 14:43:30 +0500 #414

Thanks dear...

spitfire (spitfire) 2012-10-09 14:48:12 +0500 #415

Thinking.......thinking.....

spitfire (spitfire) 2012-10-09 14:52:54 +0500 #416

some fine work with hack saw blade......

spitfire (spitfire) 2012-10-09 14:57:02 +0500 #417

My son interestingly watching his project.......

spitfire (spitfire) 2012-10-09 15:12:24 +0500 #418

Marking for some fine tuning.....

spitfire (spitfire) 2012-10-09 15:34:33 +0500 #419

So like this .....our both rear floor pans are done/fabricated .........

Now some display of the final product......:).....Right floor pan upper view....

spitfire (spitfire) 2012-10-09 15:42:50 +0500 #420

See the finish of those difficult curves and contours.....