Ke Pioneer Scratch Remover + Ke Pioneer Ceramic Coating Spray with Free Microfibre

KE Pioneer Professional Scratch Remover with Applicator 200g Details:

KE Pioneer Professional Scratch Remover is an all-in-one anti-swirl premium grade compound that removes minor scratches and swirls to deliver a mirror-like shine. It is easy to use and does not require hard buffing, ideal for lighter restoration jobs.

Ultrafine abrasive powders are powerful enough to remove scuffs, scratches, and paint transfer but will not cause micro scratching or swirl marks.
 

KE Pioneer Professional Scratch Remover

Removes Scratches and Scuffs. Easy to use on all types of paintwork!

• Ultra fine abrasive powders remove scratches and swirls.

• Powerful enough to remove scuffs and paint transfer.

• Added solvents ensure smooth application and easy removal.

• Will not cause micro scratching or added swirl marks.

HOW TO USE SCRATCH REMOVER

Step 1

Ensure the area surrounding the scratch is clean and dry.

Step 2

Apply an approximate 10p size dose of product to a soft damp cloth or foam applicator pad.

Step 3

Using firm pressure work over the scratch/scuff or paint transfer using back and forth strokes.

Step 4

Leave to dry to a haze then buff with a dry microfibre cloth.

If the scratch, scuff, or paint transfer has not been completely removed then repeat a second time.
 

Ke Pioneer Professional Ceramic Coating Spray - The Ultimate Paint Protection - 500ml - Shine Boost

The Advanced Hybrid Solutions Ceramic Spray Coating is the finishing touch to a pro-level detailing job right in your driveway. this spray ceramic coating seals the finish of your car or truck with the incredible shine, water-beading hydrophobicity and the long-lasting protection of a ceramic car wax in an easy-to-use, spray on/wipe off application. Professional-quality results have never come easier. It's an ideal way to protect the finish of your new car or to shine and protect your freshly washed and polished vehicle. It's the ultimate in car wax sprays!
 

-----HOW TO USE IT-----

JUST SPRAY ON & WIPE'S OFF

STEP 1: Wash and dry the car.

STEP 2: This product does not require surface prep before use: however, we recommend applying clay bar to your finish to remove strains from the finish, such as those created by tar, bug residue or bird droppings, for the best product results.

STEP 3: Shake container and spray two mists of product in a 2" x 2" section.

STEP 4:  Using a microfiber towel, wipe the spray coating into the finish.

STEP 5: Flip the cloth to a clean, dry side and buff to a mirror-like shine.

STEP 6: Move to the next 2" x 2" panel and repeat around the car.

STEP 7: For maximum protection and an even higher shine, allow Ceramic Spray Coating to cure for 24 hours before applying a second coating to your car exterior, repeating steps 2-6.