NASA Bitumen Undercoat - 700ml

NASA Bitumen Undercoat - 700ml

NASA Bitumen Undercoat is a specially formulated product designed to protect the under body parts of vehicles from rust and corrosion. It provides a thick, elastic protective layer that shields against road salt, rainwater, ice, snow, weak acids, and bases.

Uses:

• Ideal for re-touching of underbodies, wheel arches, chassis rails, off-road vehicles, trucks, and caravans.
• Can also be used to seal leaking gutters and patch roofs.
• Applicable to various parts of machinery, as well as steel, aluminum, and fiberglass, to protect them from rust and corrosion.

Directions For Use:

• Remove all traces of oil, grease, or dirt. Eliminate oil paint and loose rust using steel wool or a wire brush.
• Clean the area to be coated, removing all dirt, oil, and debris. If necessary, thoroughly dry the area. Remove any previous surface coatings with a wire brush and abrasive paper.
• Shake the can vigorously before use. Apply in smooth strokes from 8-12 inches away. For enhanced corrosion protection, please apply minimum 3 coats to protect completely.
• After use, invert the can and press the actuator for a few seconds to prevent nozzle blockage.
• Provides protection for up to 2 years after application.

Precautions:

• Store at room temperature.
• Turn off the engine before use.
• Wear a mask and gloves while using the product.
• Do not spray near firearms or where firearms are stored.
• The contents are highly flammable and under pressure.
• Do not puncture or incinerate the can.
• Do not wash the coated surface with solvents or kerosene oil after application, as this will void the protection and it will remove the Undercoat layer from the parts.

Pack Size:

700 ML