Track Bundle of 3-Interior Ceramic Coating 500ml+ Scratch Remover 200g+Ceramic Wax 200g With Towel

1.Track Scratch Remover 2.Track Interior Ceramic Coating 3.Track Ceramic Wax

Say Good Bye to Scratches.

Instantly Erase Scratches, Swirls & Scuffs: Say goodbye to unsightly paint imperfections with our Car Paint Scratch Remover—a powerful yet safe formula designed to eliminate light scratches, swirl marks, and surface blemishes with minimal effort. Whether you're fixing minor damage or restoring shine, this scratch remover delivers smooth, glossy results in minutes.

Where to Use:

All types of car paint, clear coats.

How to Use:

Follow the application guideline for best results.

1. Wash and dry the affected area thoroughly to remove dirt and debris.
2. Ensure the surface is cool and in the shade.
3. Squeeze a small amount of scratch remover onto a clean microfiber cloth, foam pad, or applicator.
4. Using firm, circular motions, rub the product into the scratched area.
5.  Continue rubbing for 30–60 seconds until the scratch visibly fades. 

   2.Track Interior Ceramic Coating

   Revive and protect your car’s interior with Track Interior Coating Spray, a high-performance formula infused with nano technology for long-lasting defense and a fresh, clean scent. Designed for use on all interior surfaces—plastic, vinyl, leather, rubber, and trim—this spray delivers up to 3 months of durable protection while restoring a natural, factory-fresh appearance.

   Track doesn’t just shield your interior from UV rays, fading, cracking, dust, and sun damage—it also works as a refreshing odor eliminator, leaving behind a subtle new car scent that makes every drive feel brand new.

   Where to use:

   Safe on All Surfaces – Perfect for leather, plastic, vinyl, rubber, and trim

   How to Use:

   1.      Ensure all interior surfaces (plastic, leather, vinyl, rubber, etc.) are clean and dry. Remove any dust, dirt, or stains before applying.

   2.      Shake the bottle thoroughly to activate the formula.

   3.      Mist the product directly onto the surface, or spray onto a microfiber cloth for more controlled application—especially on smaller or sensitive areas.

   4.      Using a clean microfiber cloth, spread the product evenly over the surface. For textured areas or seams, use a detailing brush to work the product in.

   5.      After 1–2 minutes, lightly buff the surface with a second dry microfiber towel for a smooth, streak-free, non-greasy finish.

   6.      Allow the coating to cure for 10–15 minutes. Avoid contact with moisture during this time for best result.

 Track Ceramic Car Wax Kit -200g