Here are few interesting tips on tires and alloy rims


People in Pakistan are not only vehicle’s enthusiast, but they are also very passionate towards the machinery, engine and the tires of the vehicles. But, people mostly experiment with the tires of their vehicle and are always in search of various design and quality of the tires. Using right tires for the vehicles give a pleasant driving experience. However, choosing a right tire and appropriate alloy rims for a car is one of the difficult tasks. However, people often neglect few simple yet important points, for example, people often overlook the durability, maintenance, and reliability of the tires and alloy rims. So, here are some useful tips to make the tires and alloy rims to last long.

Do not use large tires for the cars up to 1000cc. If you want to replace the original tires than its better to use such tires which are only 1 inch larger than the original ones. Using larger than 1 inch may cause extra load on the engine. If your car is above 1000cc, then the size of tires can be safely increased up to 2 inches. Do not forget to replace the spare wheel with a larger one when you replace the original tires with the larger ones. Mostly, the smaller spare wheel is installed in the cars. Because increasing the size of the wheel and ignoring the size of a spare wheel may cause a problem during driving.

As for the alloy rims, it is often recommended not to change the original ones. But even if you buy a new one then avoid the black ones. Black ones may look good, but they are hard to clean. Avoid using the low profile alloy rims for they can damage the tire which is in contact with the sharp metal surface. Moreover, low profile alloy rims may look good, but it not only affects the durability of the tire but these low profile alloy rims are a disadvantage on a bumpy road. Avoid buying the alloy rims which have covered bolts. Bolts are covered with a plastic plate if catch corrosion it will not wear off easily. Mostly shiny chrome rims have these types of covered bolts.

During the time of the installation of the new tires wheel alignment and balancing may also be done simultaneously. Avoid installing the larger size alloy rims on the original tires because this process requires intense alternation with the tire and axle. The beauty of the tire is increased by the black or pure white colored alloy rims. But the sharp metal surface, on the other hand, can be an odd yet peculiar notch on the alloy rim of your tire.

The alloy rims can be deformed, break and their strength are affected as well if an inappropriate alloy rim is used. Similarly, a bad rim will affect the tire as well. Therefore, these tips mentioned above will surely help the local vehicle enthusiast on how to maintain and increase the lifespan of both tires and rims.


Google App Store App Store

Top